[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Xylo-SDR] Some design thoughts requested
I'll throw in another contender:
http://www.hirose.co.jp/cataloge_hp/e57220088.pdf
Hirose FX2 connectors.
73 de Phil N8VB
On 1/4/06, Leon Heller <leon.heller@bulldoghome.com> wrote:
> ----- Original Message -----
> From: "Philip Covington" <p.covington@gmail.com>
> To: "Xylo-SDR Discussion" <xylo-sdr@lists.ae5k.us>
> Sent: Wednesday, January 04, 2006 2:57 PM
> Subject: Re: [Xylo-SDR] Some design thoughts requested
>
>
> Yep, DIN41612 seems like a good choice. I agree the DDR DIMM sockets
> impose too many restrictions for the type of use we intend to put them
> to for the Xylo stuff (physical insert/remove cycles and 1.27mm board
> thickness limitations).
>
> The Flex 10K10 FPGA system I mentioned previously, had the FPGA etc. on a
> half-size Eurocard (100 mm x 80 mm) with a right-angle 64-way DIN41612
> connector, so that it could be plugged vertically into straight connectors
> on a motherboard, or whatever. The FPGA board was 4-layer, and the boards I
> attached to it (with things like displays and switches, or a VGA interface,
> were either simple home-made PCBs or Eurocard prototyping boards. I'll post
> a photo, when I find it.
>
> Leon
>
> _______________________________________________
> Xylo-SDR mailing list
> To post msg: Xylo-SDR@ae5k.us
> Subscription help: http://lists.ae5k.us/listinfo.cgi/xylo-sdr-ae5k.us
> Xylo-SDR web page: http://xylo-sdr.ae5k.us
> Forum pages: http://www.hamsdr.com/hamsdrforum/
>