[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Xylo-SDR] Teamspeak FPGA discussion - Havewepaintedourselvesinto a corner? Boxed ourselves in?
Leon Heller, G1HSM
----- Original Message -----
From: "vk4str" <firstname.lastname@example.org>
To: "Xylo-SDR Discussion" <email@example.com>
Sent: Monday, January 23, 2006 2:02 AM
Subject: Re: [Xylo-SDR] Teamspeak FPGA discussion -
Havewepaintedourselvesinto a corner? Boxed ourselves in?
Philip Covington wrote:
On 1/22/06, Leon Heller <firstname.lastname@example.org> wrote:
So we are definitely sticking with the DIN41612 connector?
100% yes as far as I am concerned.
73 de Phil
Hi Phil and Leon,
Great inputs from you guys! I am also 100% for the DIN 96 pin connector.
Best option for our project cost wise and ease of design/construction by
I am putting up for discussion the size of the boards.
Now that we have more space available inside the Aria enclosure, would
it not be more practical to go for the 160x100 mm board size? We lose a
fair bit of board space due to the connector, so we might be hard
pressed to fit everything on the small 100x100 boards.
I was proposing that we have a daughter board facility, for flexibility.
Should be plenty of room with that.