http://openhpsdr.org/wiki/api.php?action=feedcontributions&feedformat=atom&user=AB1DO 2026-05-08T23:13:57Z User contributions MediaWiki 1.26.0 http://openhpsdr.org/wiki/index.php?title=DOC&diff=2045 2009-09-02T17:36:05Z

<p>AB1DO: </p> <hr /> <div>== HPSDR Documentation ==<br /> <br /> This newly created section will eventually contain links for downloading all documentation for HPSDR Projects.<br /> <br /> Please bear with us as this area comes together.<br /> <br /> More documentation and resources are available at [http://openhpsdr.org/resources.html Resources] (Software links) and [http://openhpsdr.org/support.html Support] (Hardware documentation).<br /> <br /> == Atlas ==<br /> [[Image:atlas.jpg|thumbnail|left|[http://www.needles.de/HPSDR/ATLAS_Docu_USLetterLowRes.pdf Atlas Backplane ], ''Rev 1.4, June 2006''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://www.needles.de/HPSDR/ATLAS_Docu_USLetterLowRes.pdf Atlas Backplane ], ''Rev 1.4, June 2006''<br /> <br /> This is the backplane into which all other board are pluged for power and communications.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Pinocchio ==<br /> [[Image:pino.jpg|thumbnail|left|[http://www.needles.de/HPSDR/PINOCCHIO_DocUSLett.pdf Pinocchio Extender Board], ''Rev 1.0, July 2006''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://www.needles.de/HPSDR/PINOCCHIO_DocUSLett.pdf Pinocchio Extender Board], ''Rev 1.0, July 2006''<br /> <br /> This board allows the experimenter to extend the HPSDR board above the other boards so that measurments can be taken while the system is in use. Mainly used by board developers.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Penelope ==<br /> <br /> [[Image:Penny Cover Rev1.0.jpg|thumbnail|left|[http://openhpsdr.org/wiki/images/4/4c/Penelope_manual_v_1-2.pdf Penelope with PowerSDR ], ''Rev 1.2, May 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://openhpsdr.org/wiki/images/4/4c/Penelope_manual_v_1-2.pdf Penelope with PowerSDR, Rev 1.2], ''May 2008''<br /> <br /> The manual describes how to physically set up Penelope as well as how to set up PowerSDR to use Penelope. Revision 1.1 contains corrections to the pin-out of the DB-25 connector (changed pin 7 to 17 as one of the analog grounds and added pin 21 as digital ground). Additionally we note that the current version of PowerSDR for Penelope contains a bug that, on start-up, will immediately make Penelope transmit in voice modes. A work-around to avoid this is described in Appendix A.<br /> <br /> Revision 1.2 contains an additional section explaining why no Transmit Image Rejection is necessary and that therefore the corresponding Phase and Gain controls should both be set to zero.<br /> <br /> <br /> <br /> <br /> <br /> <br /> ==Mercury==<br /> <br /> [[Image:Mercury Cover Rev1.0.png|thumbnail|left|[http://openhpsdr.org/wiki/images/8/8c/Mercury_Operation_with_PowerSDR_v1-0.pdf Mercury Operation with PowerSDR], ''Rev 1.0, January 2009''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://openhpsdr.org/wiki/images/8/8c/Mercury_Operation_with_PowerSDR_v1-0.pdf Mercury Operation with PowerSDR, Rev 1.0], ''January 2009''.<br /> <br /> This manual describes how to physically set up Mercury and how to set up PowerSDR to use Mercury.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Janus/Ozy ==<br /> <br /> [[Image:Cover Rev2.1.jpg|thumbnail|left|[http://openhpsdr.org/wiki/images/c/cc/Janus_%26_Ozy_with_PowerSDR_v2-1.pdf Janus &amp; Ozy with PowerSDR], ''Rev 2.1, September 2009''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://openhpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR, Rev 2.1], ''September 2009''<br /> <br /> This revision updates the DB-9 connector pin-out with an independent PTT on pin 8(valid from Ozy_Janus.rbf v1.6 onwards).</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=DOC&diff=2044 2009-09-02T17:35:16Z

<p>AB1DO: </p> <hr /> <div>== HPSDR Documentation ==<br /> <br /> This newly created section will eventually contain links for downloading all documentation for HPSDR Projects.<br /> <br /> Please bear with us as this area comes together.<br /> <br /> More documentation and resources are available at [http://openhpsdr.org/resources.html Resources] (Software links) and [http://openhpsdr.org/support.html Support] (Hardware documentation).<br /> <br /> == Atlas ==<br /> [[Image:atlas.jpg|thumbnail|left|[http://www.needles.de/HPSDR/ATLAS_Docu_USLetterLowRes.pdf Atlas Backplane ], ''Rev 1.4, June 2006''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://www.needles.de/HPSDR/ATLAS_Docu_USLetterLowRes.pdf Atlas Backplane ], ''Rev 1.4, June 2006''<br /> <br /> This is the backplane into which all other board are pluged for power and communications.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Pinocchio ==<br /> [[Image:pino.jpg|thumbnail|left|[http://www.needles.de/HPSDR/PINOCCHIO_DocUSLett.pdf Pinocchio Extender Board], ''Rev 1.0, July 2006''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://www.needles.de/HPSDR/PINOCCHIO_DocUSLett.pdf Pinocchio Extender Board], ''Rev 1.0, July 2006''<br /> <br /> This board allows the experimenter to extend the HPSDR board above the other boards so that measurments can be taken while the system is in use. Mainly used by board developers.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Penelope ==<br /> <br /> [[Image:Penny Cover Rev1.0.jpg|thumbnail|left|[http://openhpsdr.org/wiki/images/4/4c/Penelope_manual_v_1-2.pdf Penelope with PowerSDR ], ''Rev 1.2, May 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://openhpsdr.org/wiki/images/4/4c/Penelope_manual_v_1-2.pdf Penelope with PowerSDR, Rev 1.2], ''May 2008''<br /> <br /> The manual describes how to physically set up Penelope as well as how to set up PowerSDR to use Penelope. Revision 1.1 contains corrections to the pin-out of the DB-25 connector (changed pin 7 to 17 as one of the analog grounds and added pin 21 as digital ground). Additionally we note that the current version of PowerSDR for Penelope contains a bug that, on start-up, will immediately make Penelope transmit in voice modes. A work-around to avoid this is described in Appendix A.<br /> <br /> Revision 1.2 contains an additional section explaining why no Transmit Image Rejection is necessary and that therefore the corresponding Phase and Gain controls should both be set to zero.<br /> <br /> <br /> <br /> <br /> <br /> <br /> ==Mercury==<br /> <br /> [[Image:Mercury Cover Rev1.0.png|thumbnail|left|[http://openhpsdr.org/wiki/images/8/8c/Mercury_Operation_with_PowerSDR_v1-0.pdf Mercury Operation with PowerSDR], ''Rev 1.0, January 2009''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://openhpsdr.org/wiki/images/8/8c/Mercury_Operation_with_PowerSDR_v1-0.pdf Mercury Operation with PowerSDR, Rev 1.0], ''January 2009''.<br /> <br /> This manual describes how to physically set up Mercury and how to set up PowerSDR to use Mercury.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Janus/Ozy ==<br /> <br /> [[Image:Cover Rev2.1.jpg|thumbnail|left|[http://openhpsdr.org/wiki/images/c/cc/Janus_%26_Ozy_with_PowerSDR_v2-1.pdf Janus &amp; Ozy with PowerSDR], ''Rev 2.1, September 2009''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://openhpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR, Rev 2.0], ''September 2009''<br /> <br /> This revision updates the DB-9 connector pin-out with an independent PTT on pin 8(valid from Ozy_Janus.rbf v1.6 onwards).</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=File:Cover_Rev2.1.jpg&diff=2043 2009-09-02T17:30:34Z

<p>AB1DO: </p> <hr /> <div></div>

AB1DO http://openhpsdr.org/wiki/index.php?title=File:Janus_%26_Ozy_with_PowerSDR_v2-1.pdf&diff=2042 2009-09-02T17:19:32Z

<p>AB1DO: </p> <hr /> <div></div>

AB1DO http://openhpsdr.org/wiki/index.php?title=DOC&diff=730 2009-01-11T20:59:25Z

<p>AB1DO: </p> <hr /> <div>== HPSDR Documentation ==<br /> <br /> This newly created section will eventually contain links for downloading all documentation for HPSDR Projects.<br /> <br /> Please bear with us as this area comes together.<br /> <br /> == Atlas ==<br /> [[Image:atlas.jpg|thumbnail|left|[http://www.needles.de/HPSDR/ATLAS_Docu_USLetterLowRes.pdf Atlas Backplane ], ''Rev 1.4, June 2006''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://www.needles.de/HPSDR/ATLAS_Docu_USLetterLowRes.pdf Atlas Backplane ], ''Rev 1.4, June 2006''<br /> <br /> This is the backplane into which all other board are pluged for power and communications.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Pinocchio ==<br /> [[Image:pino.jpg|thumbnail|left|[http://www.needles.de/HPSDR/PINOCCHIO_DocUSLett.pdf Pinocchio Extender Board], ''Rev 1.0, July 2006''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://www.needles.de/HPSDR/PINOCCHIO_DocUSLett.pdf Pinocchio Extender Board], ''Rev 1.0, July 2006''<br /> <br /> This board allows the experimenter to extend the HPSDR board above the other boards so that measurments can be taken while the system is in use. Mainly used by board developers.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Penelope ==<br /> <br /> [[Image:Penny Cover Rev1.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/4/4c/Penelope_manual_v_1-2.pdf Penelope with PowerSDR ], ''Rev 1.2, May 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/4/4c/Penelope_manual_v_1-2.pdf Penelope with PowerSDR, Rev 1.2], ''May 2008''<br /> <br /> The manual describes how to physically set up Penelope as well as how to set up PowerSDR to use Penelope. Revision 1.1 contains corrections to the pin-out of the DB-25 connector (changed pin 7 to 17 as one of the analog grounds and added pin 21 as digital ground). Additionally we note that the current version of PowerSDR for Penelope contains a bug that, on start-up, will immediately make Penelope transmit in voice modes. A work-around to avoid this is described in Appendix A.<br /> <br /> Revision 1.2 contains an additional section explaining why no Transmit Image Rejection is necessary and that therefore the corresponding Phase and Gain controls should both be set to zero.<br /> <br /> <br /> <br /> <br /> <br /> <br /> ==Mercury==<br /> <br /> [[Image:Mercury Cover Rev1.0.png|thumbnail|left|[http://hpsdr.org/wiki/images/8/8c/Mercury_Operation_with_PowerSDR_v1-0.pdf Mercury Operation with PowerSDR], ''Rev 1.0, January 2009''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/8/8c/Mercury_Operation_with_PowerSDR_v1-0.pdf Mercury Operation with PowerSDR, Rev 1.0], ''January 2009''.<br /> <br /> This manual describes how to physically set up Mercury and how to set up PowerSDR to use Mercury.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Janus/Ozy ==<br /> <br /> [[Image:Cover Rev2.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR], ''Rev 2.0, February 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR, Rev 2.0], ''February 2008''<br /> <br /> This revision describes how to use USBIO.exe to install the USB driver for Ozy and PowerSDR v1.10.1 or higher to use Ozy for control of the SDR-1000 and/or Janus/Ozy for the audio. Finally a more complete description of all the LEDs on Ozy and Janus has been added.</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=File:Mercury_Cover_Rev1.0.png&diff=729 2009-01-11T20:57:29Z

<p>AB1DO: </p> <hr /> <div></div>

AB1DO http://openhpsdr.org/wiki/index.php?title=DOC&diff=728 2009-01-11T20:54:52Z

<p>AB1DO: </p> <hr /> <div>== HPSDR Documentation ==<br /> <br /> This newly created section will eventually contain links for downloading all documentation for HPSDR Projects.<br /> <br /> Please bear with us as this area comes together.<br /> <br /> == Atlas ==<br /> [[Image:atlas.jpg|thumbnail|left|[http://www.needles.de/HPSDR/ATLAS_Docu_USLetterLowRes.pdf Atlas Backplane ], ''Rev 1.4, June 2006''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://www.needles.de/HPSDR/ATLAS_Docu_USLetterLowRes.pdf Atlas Backplane ], ''Rev 1.4, June 2006''<br /> <br /> This is the backplane into which all other board are pluged for power and communications.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Pinocchio ==<br /> [[Image:pino.jpg|thumbnail|left|[http://www.needles.de/HPSDR/PINOCCHIO_DocUSLett.pdf Pinocchio Extender Board], ''Rev 1.0, July 2006''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://www.needles.de/HPSDR/PINOCCHIO_DocUSLett.pdf Pinocchio Extender Board], ''Rev 1.0, July 2006''<br /> <br /> This board allows the experimenter to extend the HPSDR board above the other boards so that measurments can be taken while the system is in use. Mainly used by board developers.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Penelope ==<br /> <br /> [[Image:Penny Cover Rev1.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/4/4c/Penelope_manual_v_1-2.pdf Penelope with PowerSDR ], ''Rev 1.2, May 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/4/4c/Penelope_manual_v_1-2.pdf Penelope with PowerSDR, Rev 1.2], ''May 2008''<br /> <br /> The manual describes how to physically set up Penelope as well as how to set up PowerSDR to use Penelope. Revision 1.1 contains corrections to the pin-out of the DB-25 connector (changed pin 7 to 17 as one of the analog grounds and added pin 21 as digital ground). Additionally we note that the current version of PowerSDR for Penelope contains a bug that, on start-up, will immediately make Penelope transmit in voice modes. A work-around to avoid this is described in Appendix A.<br /> <br /> Revision 1.2 contains an additional section explaining why no Transmit Image Rejection is necessary and that therefore the corresponding Phase and Gain controls should both be set to zero.<br /> <br /> <br /> <br /> <br /> <br /> <br /> ==Mercury==<br /> <br /> [[Image:Cover Rev1.2.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/8/8c/Mercury_Operation_with_PowerSDR_v1-0.pdf Mercury Operation with PowerSDR], ''Rev 1.0, January 2009''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/8/8c/Mercury_Operation_with_PowerSDR_v1-0.pdf Mercury Operation with PowerSDR, Rev 1.0], ''January 2009''.<br /> <br /> This manual describes how to physically set up Mercury and how to set up PowerSDR to use Mercury.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Janus/Ozy ==<br /> <br /> [[Image:Cover Rev2.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR], ''Rev 2.0, February 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR, Rev 2.0], ''February 2008''<br /> <br /> This revision describes how to use USBIO.exe to install the USB driver for Ozy and PowerSDR v1.10.1 or higher to use Ozy for control of the SDR-1000 and/or Janus/Ozy for the audio. Finally a more complete description of all the LEDs on Ozy and Janus has been added.</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=File:Mercury_Operation_with_PowerSDR_v1-0.pdf&diff=727 2009-01-11T20:46:32Z

<p>AB1DO: Manual describing setup of Mercury and Operation with PowerSDR</p> <hr /> <div>Manual describing setup of Mercury and Operation with PowerSDR</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=DOC&diff=514 2008-05-25T15:09:52Z

<p>AB1DO: </p> <hr /> <div>== HPSDR Documentation ==<br /> <br /> This newly created section will eventually contain links for downloading all documentation for HPSDR Projects.<br /> <br /> Please bear with us as this area comes together.<br /> <br /> <br /> <br /> == Penelope ==<br /> <br /> [[Image:Penny Cover Rev1.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/4/4c/Penelope_manual_v_1-2.pdf Penelope with PowerSDR ], ''Rev 1.2, May 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/4/4c/Penelope_manual_v_1-2.pdf Penelope with PowerSDR, Rev 1.2], ''May 2008''<br /> <br /> The manual describes how to physically set up Penelope as well as how to set up PowerSDR to use Penelope. Revision 1.1 contains corrections to the pin-out of the DB-25 connector (changed pin 7 to 17 as one of the analog grounds and added pin 21 as digital ground). Additionally we note that the current version of PowerSDR for Penelope contains a bug that, on start-up, will immediately make Penelope transmit in voice modes. A work-around to avoid this is described in Appendix A.<br /> <br /> Revision 1.2 contains an additional section explaining why no Transmit Image Rejection is necessary and that therefore the corresponding Phase and Gain controls should both be set to zero.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Janus/Ozy ==<br /> <br /> [[Image:Cover Rev2.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR], ''Rev 2.0, February 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR, Rev 2.0], ''February 2008''<br /> <br /> This revision describes how to use USBIO.exe to install the USB driver for Ozy and PowerSDR v1.10.1 or higher to use Ozy for control of the SDR-1000 and/or Janus/Ozy for the audio. Finally a more complete description of all the LEDs on Ozy and Janus has been added.<br /> <br /> <br /> [[Image:Cover Rev1.2.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR], ''Rev 1.2, June 2007''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR, Rev 1.2], ''June 2007''.<br /> <br /> This revision includes the updated SVN location for the PowerSDR package, which has a modified initozy.bat with faster responding Ozy control of the SDR-1000. This revision also includes some information on Janus LEDs 4 (yellow) and 5 (green) that light up before initozy.bat is run.</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=File:Penelope_manual_v_1-2.pdf&diff=513 2008-05-25T15:01:14Z

<p>AB1DO: </p> <hr /> <div></div>

AB1DO http://openhpsdr.org/wiki/index.php?title=DOC&diff=509 2008-05-13T16:57:41Z

<p>AB1DO: </p> <hr /> <div>== HPSDR Documentation ==<br /> <br /> This newly created section will eventually contain links for downloading all documentation for HPSDR Projects.<br /> <br /> Please bear with us as this area comes together.<br /> <br /> <br /> <br /> == Penelope ==<br /> <br /> [[Image:Penny Cover Rev1.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/1/13/Penelope_manual_v_1-1.pdf Penelope with PowerSDR ], ''Rev 1.1, May 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/1/13/Penelope_manual_v_1-1.pdf Penelope with PowerSDR, Rev 1.1], ''May 2008''<br /> <br /> The manual describes how to physically set up Penelope as well as how to set up PowerSDR to use Penelope. This latest revision contains corrections to the pin-out of the DB-25 connector (changed pin 7 to 17 as one of the analog grounds and added pin 21 as digital ground). Additionally we note that the current version of PowerSDR for Penelope contains a bug that, on start-up, will immediately make Penelope transmit in voice modes. A work-around to avoid this is described in Appendix A.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Janus/Ozy ==<br /> <br /> [[Image:Cover Rev2.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR], ''Rev 2.0, February 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR, Rev 2.0], ''February 2008''<br /> <br /> This revision describes how to use USBIO.exe to install the USB driver for Ozy and PowerSDR v1.10.1 or higher to use Ozy for control of the SDR-1000 and/or Janus/Ozy for the audio. Finally a more complete description of all the LEDs on Ozy and Janus has been added.<br /> <br /> <br /> [[Image:Cover Rev1.2.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR], ''Rev 1.2, June 2007''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR, Rev 1.2], ''June 2007''.<br /> <br /> This revision includes the updated SVN location for the PowerSDR package, which has a modified initozy.bat with faster responding Ozy control of the SDR-1000. This revision also includes some information on Janus LEDs 4 (yellow) and 5 (green) that light up before initozy.bat is run.</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=File:Penelope_manual_v_1-1.pdf&diff=508 2008-05-13T16:51:00Z

<p>AB1DO: Penelope manual rev 1.1 with corrections to pin-out of DB25 connector and work-around to avoid Penelope transmitting on start-up</p> <hr /> <div>Penelope manual rev 1.1 with corrections to pin-out of DB25 connector and work-around to avoid Penelope transmitting on start-up</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=DOC&diff=507 2008-05-07T13:00:26Z

<p>AB1DO: </p> <hr /> <div>== HPSDR Documentation ==<br /> <br /> This newly created section will eventually contain links for downloading all documentation for HPSDR Projects.<br /> <br /> Please bear with us as this area comes together.<br /> <br /> <br /> <br /> == Penelope ==<br /> <br /> [[Image:Penny Cover Rev1.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/1/1d/Penelope_manual_v_1-0.pdf Penelope with PowerSDR ], ''Rev 1.0, May 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/1/1d/Penelope_manual_v_1-0.pdf Penelope with PowerSDR, Rev 1.0], ''May 2008''<br /> <br /> The manual describes how to physically set up Penelope as well as how to set up PowerSDR to use Penelope.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Janus/Ozy ==<br /> <br /> [[Image:Cover Rev2.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR], ''Rev 2.0, February 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR, Rev 2.0], ''February 2008''<br /> <br /> This revision describes how to use USBIO.exe to install the USB driver for Ozy and PowerSDR v1.10.1 or higher to use Ozy for control of the SDR-1000 and/or Janus/Ozy for the audio. Finally a more complete description of all the LEDs on Ozy and Janus has been added.<br /> <br /> <br /> [[Image:Cover Rev1.2.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR], ''Rev 1.2, June 2007''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR, Rev 1.2], ''June 2007''.<br /> <br /> This revision includes the updated SVN location for the PowerSDR package, which has a modified initozy.bat with faster responding Ozy control of the SDR-1000. This revision also includes some information on Janus LEDs 4 (yellow) and 5 (green) that light up before initozy.bat is run.</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=DOC&diff=506 2008-05-06T20:42:10Z

<p>AB1DO: </p> <hr /> <div>== HPSDR Documentation ==<br /> <br /> This newly created section will eventually contain links for downloading all documentation for HPSDR Projects.<br /> <br /> Please bear with us as this area comes together.<br /> <br /> <br /> Penny Cover Rev1.0.jpg<br /> <br /> == Penelope ==<br /> <br /> [[Image:Penny Cover Rev1.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/1/1d/Penelope_manual_v_1-0.pdf Penelope with PowerSDR ], ''Rev 1.0, May 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/1/1d/Penelope_manual_v_1-0.pdf Penelope with PowerSDR, Rev 1.0], ''May 2008''<br /> <br /> The manual describes how to physically set up Penelope as well as how to set up PowerSDR to use Penelope.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Janus/Ozy ==<br /> <br /> [[Image:Cover Rev2.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR], ''Rev 2.0, February 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR, Rev 2.0], ''February 2008''<br /> <br /> This revision describes how to use USBIO.exe to install the USB driver for Ozy and PowerSDR v1.10.1 or higher to use Ozy for control of the SDR-1000 and/or Janus/Ozy for the audio. Finally a more complete description of all the LEDs on Ozy and Janus has been added.<br /> <br /> <br /> [[Image:Cover Rev1.2.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR], ''Rev 1.2, June 2007''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR, Rev 1.2], ''June 2007''.<br /> <br /> This revision includes the updated SVN location for the PowerSDR package, which has a modified initozy.bat with faster responding Ozy control of the SDR-1000. This revision also includes some information on Janus LEDs 4 (yellow) and 5 (green) that light up before initozy.bat is run.</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=DOC&diff=505 2008-05-06T19:49:35Z

<p>AB1DO: </p> <hr /> <div>== HPSDR Documentation ==<br /> <br /> This newly created section will eventually contain links for downloading all documentation for HPSDR Projects.<br /> <br /> Please bear with us as this area comes together.<br /> <br /> <br /> Penny Cover Rev1.0.jpg<br /> <br /> == Penelope ==<br /> <br /> [[Image:Penny Cover Rev1.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/1/1d/Penelope_manual_v_1-0.pdf Penelope with PowerSDR], ''Rev 1.0, May 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/1/1d/Penelope_manual_v_1-0.pdf Penelope with PowerSDR, Rev 1.0], ''May 2008''<br /> <br /> The manual describes how to physically set up Penelope as well as how to set up PowerSDR to use Penelope.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Janus/Ozy ==<br /> <br /> [[Image:Cover Rev2.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR], ''Rev 2.0, February 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR, Rev 2.0], ''February 2008''<br /> <br /> This revision describes how to use USBIO.exe to install the USB driver for Ozy and PowerSDR v1.10.1 or higher to use Ozy for control of the SDR-1000 and/or Janus/Ozy for the audio. Finally a more complete description of all the LEDs on Ozy and Janus has been added.<br /> <br /> <br /> [[Image:Cover Rev1.2.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR], ''Rev 1.2, June 2007''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR, Rev 1.2], ''June 2007''.<br /> <br /> This revision includes the updated SVN location for the PowerSDR package, which has a modified initozy.bat with faster responding Ozy control of the SDR-1000. This revision also includes some information on Janus LEDs 4 (yellow) and 5 (green) that light up before initozy.bat is run.</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=DOC&diff=504 2008-05-06T19:48:05Z

<p>AB1DO: </p> <hr /> <div>== HPSDR Documentation ==<br /> <br /> This newly created section will eventually contain links for downloading all documentation for HPSDR Projects.<br /> <br /> Please bear with us as this area comes together.<br /> <br /> <br /> Penny Cover Rev1.0.jpg<br /> <br /> == Penelope ==<br /> <br /> [[Image:Penny Cover Rev1.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/1/1d/Penelope_manual_v_1-0.pdf Penelope with PowerSDR], ''Rev 1.0, May 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://http://hpsdr.org/wiki/images/1/1d/Penelope_manual_v_1-0.pdf Peneolpe with PowerSDR, Rev 1.0], ''May 2008''<br /> <br /> The manual describes how to physically set up Penelope as well as how to set up PowerSDR to use Penelope.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Janus/Ozy ==<br /> <br /> [[Image:Cover Rev2.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR], ''Rev 2.0, February 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR, Rev 2.0], ''February 2008''<br /> <br /> This revision describes how to use USBIO.exe to install the USB driver for Ozy and PowerSDR v1.10.1 or higher to use Ozy for control of the SDR-1000 and/or Janus/Ozy for the audio. Finally a more complete description of all the LEDs on Ozy and Janus has been added.<br /> <br /> <br /> [[Image:Cover Rev1.2.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR], ''Rev 1.2, June 2007''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR, Rev 1.2], ''June 2007''.<br /> <br /> This revision includes the updated SVN location for the PowerSDR package, which has a modified initozy.bat with faster responding Ozy control of the SDR-1000. This revision also includes some information on Janus LEDs 4 (yellow) and 5 (green) that light up before initozy.bat is run.</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=File:Penelope_manual_v_1-0.pdf&diff=503 2008-05-06T19:43:45Z

<p>AB1DO: Penelope Operation with PowerSDR, Manual Rev 1.0</p> <hr /> <div>Penelope Operation with PowerSDR, Manual Rev 1.0</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=DOC&diff=502 2008-05-06T19:42:52Z

<p>AB1DO: </p> <hr /> <div>== HPSDR Documentation ==<br /> <br /> This newly created section will eventually contain links for downloading all documentation for HPSDR Projects.<br /> <br /> Please bear with us as this area comes together.<br /> <br /> <br /> Penny Cover Rev1.0.jpg<br /> <br /> == Penelope ==<br /> <br /> [[Image:Penny Cover Rev1.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Penelope with PowerSDR], ''Rev 1.0, May 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR, Rev 2.0], ''February 2008''<br /> <br /> This revision describes how to use USBIO.exe to install the USB driver for Ozy and PowerSDR v1.10.1 or higher to use Ozy for control of the SDR-1000 and/or Janus/Ozy for the audio. Finally a more complete description of all the LEDs on Ozy and Janus has been added.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> == Janus/Ozy ==<br /> <br /> [[Image:Cover Rev2.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR], ''Rev 2.0, February 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR, Rev 2.0], ''February 2008''<br /> <br /> This revision describes how to use USBIO.exe to install the USB driver for Ozy and PowerSDR v1.10.1 or higher to use Ozy for control of the SDR-1000 and/or Janus/Ozy for the audio. Finally a more complete description of all the LEDs on Ozy and Janus has been added.<br /> <br /> <br /> [[Image:Cover Rev1.2.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR], ''Rev 1.2, June 2007''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR, Rev 1.2], ''June 2007''.<br /> <br /> This revision includes the updated SVN location for the PowerSDR package, which has a modified initozy.bat with faster responding Ozy control of the SDR-1000. This revision also includes some information on Janus LEDs 4 (yellow) and 5 (green) that light up before initozy.bat is run.</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=File:Penny_Cover_Rev1.0.jpg&diff=501 2008-05-06T19:36:27Z

<p>AB1DO: Cover page of Penelope Manual</p> <hr /> <div>Cover page of Penelope Manual</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=DOC&diff=473 2008-02-29T19:50:40Z

<p>AB1DO: </p> <hr /> <div>== HPSDR Documentation ==<br /> <br /> This newly created section will eventually contain links for downloading all documentation for HPSDR Projects.<br /> <br /> Please bear with us as this area comes together.<br /> <br /> == Janus/Ozy ==<br /> <br /> [[Image:Cover Rev2.0.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR], ''Rev 2.0, February 2008''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf Janus &amp; Ozy with PowerSDR, Rev 2.0], ''February 2008''<br /> <br /> This revision describes how to use USBIO.exe to install the USB driver for Ozy and PowerSDR v1.10.1 or higher to use Ozy for control of the SDR-1000 and/or Janus/Ozy for the audio. Finally a more complete description of all the LEDs on Ozy and Janus has been added.<br /> <br /> <br /> [[Image:Cover Rev1.2.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR], ''Rev 1.2, June 2007''.]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR, Rev 1.2], ''June 2007''.<br /> <br /> This revision includes the updated SVN location for the PowerSDR package, which has a modified initozy.bat with faster responding Ozy control of the SDR-1000. This revision also includes some information on Janus LEDs 4 (yellow) and 5 (green) that light up before initozy.bat is run.</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=File:Cover_Rev2.0.jpg&diff=472 2008-02-29T19:26:06Z

<p>AB1DO: </p> <hr /> <div></div>

AB1DO http://openhpsdr.org/wiki/index.php?title=File:Janus_%26_Ozy_with_PowerSDR_v2-0.pdf&diff=471 2008-02-29T19:12:50Z

<p>AB1DO: Describes how to setup and use Ozy and/or Janus with the SDR-1000, using USBIO as the USB driver for Ozy and PowerSDR v1.10.1 or higher.</p> <hr /> <div>Describes how to setup and use Ozy and/or Janus with the SDR-1000, using USBIO as the USB driver for Ozy and PowerSDR v1.10.1 or higher.</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=DOC&diff=308 2007-06-26T15:03:16Z

<p>AB1DO: </p> <hr /> <div>== HPSDR Documentation ==<br /> <br /> This newly created section will eventually contain links for downloading all documentation for HPSDR Projects.<br /> <br /> Please bear with us as this area comes together.<br /> <br /> == Janus/Ozy ==<br /> <br /> [[Image:Cover Rev1.2.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR] ''Rev 1.2, June 2007''.]]<br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR, Rev 1.2], ''June 2007''.<br /> <br /> This revision includes the updated SVN location for the PowerSDR package, which has a modified initozy.bat with faster responding Ozy control of the SDR-1000. This revision also includes some information on Janus LEDs 4 (yellow) and 5 (green) that light up before initozy.bat is run.</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=DOC&diff=307 2007-06-26T14:53:46Z

<p>AB1DO: </p> <hr /> <div>== HPSDR Documentation ==<br /> <br /> This newly created section will eventually contain links for downloading all documentation for HPSDR Projects.<br /> <br /> Please bear with us as this area comes together.<br /> <br /> == Janus/Ozy ==<br /> <br /> [[Image:Cover Rev1.1.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR] ''Rev 1.2, June 2007''.]]<br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/0/07/Janus_&amp;_Ozy_with_PowerSDR_v1-2.pdf Janus &amp; Ozy with PowerSDR, Rev 1.1], ''June 2007''.<br /> <br /> This revision includes more information on the .NET Framework and corrected keyer connections</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=File:Janus_%26_Ozy_with_PowerSDR_v1-2.pdf&diff=306 2007-06-26T14:45:07Z

<p>AB1DO: </p> <hr /> <div></div>

AB1DO http://openhpsdr.org/wiki/index.php?title=File:Cover_Rev1.2.jpg&diff=305 2007-06-26T14:43:58Z

<p>AB1DO: Cover Page of Janus/Ozy manual, rev 1.2</p> <hr /> <div>Cover Page of Janus/Ozy manual, rev 1.2</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=DOC&diff=299 2007-06-13T17:40:21Z

<p>AB1DO: </p> <hr /> <div>== HPSDR Documentation ==<br /> <br /> This newly created section will eventually contain links for downloading all documentation for HPSDR Projects.<br /> <br /> Please bear with us as this area comes together.<br /> <br /> == Janus/Ozy ==<br /> <br /> [[Image:Cover Rev1.1.jpg|thumbnail|left|[http://hpsdr.org/wiki/images/9/98/Janus_%26_Ozy_with_PowerSDR_v1.1.pdf Janus &amp; Ozy with PowerSDR] ''Rev 1.1, June 2007''.]]<br /> <br /> <br /> <br /> [http://hpsdr.org/wiki/images/9/98/Janus_%26_Ozy_with_PowerSDR_v1.1.pdf Janus &amp; Ozy with PowerSDR, Rev 1.1], ''June 2007''.<br /> <br /> This revision includes more information on the .NET Framework and corrected keyer connections</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=File:Cover_Rev1.1.jpg&diff=298 2007-06-13T17:14:13Z

<p>AB1DO: </p> <hr /> <div></div>

AB1DO http://openhpsdr.org/wiki/index.php?title=DOC&diff=297 2007-06-13T14:46:50Z

<p>AB1DO: </p> <hr /> <div>== HPSDR Documentation ==<br /> <br /> This newly created section will eventually contain links for downloading all documentation for HPSDR Projects.<br /> <br /> Please bear with us as this area comes together.<br /> <br /> == Janus/Ozy ==<br /> <br /> [http://hpsdr.org/wiki/images/9/98/Janus_%26_Ozy_with_PowerSDR_v1.1.pdf Janus &amp; Ozy with PowerSDR, Rev 1.1], June 2007.<br /> <br /> This revision includes more information on the .NET Framework and corrected keyer connections</div>

AB1DO http://openhpsdr.org/wiki/index.php?title=File:Janus_%26_Ozy_with_PowerSDR_v1.1.pdf&diff=282 2007-06-04T20:03:42Z

<p>AB1DO: </p> <hr /> <div></div>

AB1DO