Difference between revisions of "HERMES"
From HPSDRwiki
| Line 8: | Line 8: | ||
Potential features at the moment include: | Potential features at the moment include: | ||
| + | |||
- IDC Header to enable the use of the Alex HPF/LPF board | - IDC Header to enable the use of the Alex HPF/LPF board | ||
| + | |||
- Onboard 10MHz TCXO with provision for an external input also | - Onboard 10MHz TCXO with provision for an external input also | ||
| + | |||
- A Pennywhistle type of amplifier with 15w output | - A Pennywhistle type of amplifier with 15w output | ||
| + | |||
- Microphone, headset, loudspeaker connections | - Microphone, headset, loudspeaker connections | ||
| + | |||
- 13.5v DC input | - 13.5v DC input | ||
| + | |||
- Open collector outputs for external relay/equipment control | - Open collector outputs for external relay/equipment control | ||
| + | |||
- Euro- card size PCB (160mm x 100mm) | - Euro- card size PCB (160mm x 100mm) | ||
Revision as of 00:13, 11 April 2009
Hermes - A DUC/DDC Transceiver
Project Leader: Kevin M0KHZ
Building on the success of Penelope and Mercury, Hermes will combine to two functions onto a single board to produce an HF (160-6m) Digital Down Conversion – Digital Up Conversion Transceiver.
Potential features at the moment include:
- IDC Header to enable the use of the Alex HPF/LPF board
- Onboard 10MHz TCXO with provision for an external input also
- A Pennywhistle type of amplifier with 15w output
- Microphone, headset, loudspeaker connections
- 13.5v DC input
- Open collector outputs for external relay/equipment control
- Euro- card size PCB (160mm x 100mm)
