Difference between revisions of "HERMES"

From HPSDRwiki
Jump to: navigation, search
(Hermes - A DUC/DDC Transceiver)
Line 5: Line 5:
 
Project Leader: Kevin M0KHZ
 
Project Leader: Kevin M0KHZ
  
Building on the success of Penelope and Mercury, Hermes will combine the two functions onto a single board to produce an HF (160-6m) Digital Down Conversion – Digital Up Conversion Transceiver.
+
Following the outstanding success of Mercury and Penelope, and while investigating the verilog code for both, I had the insane idea of merging the verilog code of Mercury and Penelope into a single fpga! I played around with this idea for a while and the more I thought about it the more I liked the idea.  
  
Potential features at the moment include:
+
So here is the proposal, to develop a single board HPSDR based on the hardware of Mercury and Penelope and a single large fpga.
  
- IDC Header to enable the use of the Alex HPF/LPF board set
+
This board would have PC connectivity by USB. I’m planning to squeeze this all onto Euro Card sized PCB (100 x 160 mm), and if I utilize both sides I might even have room for a Pennywhistle type PA  :).
  
- Onboard 10MHz TCXO with provision for an external input
+
Basic specs so far (nothing cast in stone)
  
- A Pennywhistle type of amplifier with 15w output
+
- Fpga EP3C25Q240C (I think this is the largest without BGA pin out)
 +
- Mercury receive chain
 +
- Penelope transmit chain
 +
- USB2 to PC data transfer
 +
- Pennywhistle PA (if there’s room)
 +
- 10Mhz ext an option
 +
- Alex filter switching header
 +
- 13.5V supply
  
- Microphone, headset, loudspeaker connections
+
Following the tradition of the HPSDR naming convention, I thought Hermes was appropriate as he was known for his invention and theft!
  
- 13.5v DC input
+
Hardware block diagram:
  
- Open  collector outputs for external relay/equipment control
+
http://hpsdr.org/wiki/index.php?title=Image:Hardware_Block_Diagram_V1_4.jpg
  
- Euro- card size PCB (160mm x 100mm)
+
Current status ( 20 April 09 ), Project proposal open for comment. Looking to nail ‘major’ hardware decisions by the end of the month. Initial draft schematics will then be produced and placed here on the Wiki for comment.
 +
 
 +
Kevin – M0KHZ

Revision as of 11:50, 20 April 2009

Hermes - A DUC/DDC Transceiver

Project Leader: Kevin M0KHZ

Following the outstanding success of Mercury and Penelope, and while investigating the verilog code for both, I had the insane idea of merging the verilog code of Mercury and Penelope into a single fpga! I played around with this idea for a while and the more I thought about it the more I liked the idea.

So here is the proposal, to develop a single board HPSDR based on the hardware of Mercury and Penelope and a single large fpga.

This board would have PC connectivity by USB. I’m planning to squeeze this all onto Euro Card sized PCB (100 x 160 mm), and if I utilize both sides I might even have room for a Pennywhistle type PA  :).

Basic specs so far (nothing cast in stone)

- Fpga EP3C25Q240C (I think this is the largest without BGA pin out) - Mercury receive chain - Penelope transmit chain - USB2 to PC data transfer - Pennywhistle PA (if there’s room) - 10Mhz ext an option - Alex filter switching header - 13.5V supply

Following the tradition of the HPSDR naming convention, I thought Hermes was appropriate as he was known for his invention and theft!

Hardware block diagram:

http://hpsdr.org/wiki/index.php?title=Image:Hardware_Block_Diagram_V1_4.jpg

Current status ( 20 April 09 ), Project proposal open for comment. Looking to nail ‘major’ hardware decisions by the end of the month. Initial draft schematics will then be produced and placed here on the Wiki for comment.

Kevin – M0KHZ