From HPSDRwiki
Revision as of 10:42, 7 May 2018 by G0ORX (Talk | contribs)

Jump to: navigation, search

An HPSDR application for Linux

linHPSDR is written in C using the GTK+ 3 toolkit. It uses the version of WDSP that has been ported over to Linux.

Both Protocol 1 and Protocol 2 are supported with up to 7 receivers depending on the HPSDR compatible radio being used.


When first started the application will try to discover all the HPSDR compatible radios connected to the network and list them in the window. Each entry in the list will show the Device type, the protocol, the protocol version, the IP address of the device,the MAC address of the device, the interface it was found on and it's status.


To start a radio select the required device and click on the Start Radio button.