LinHPSDR
From HPSDRwiki
An HPSDR application for Linux
linHPSDR is written in C using the GTK+ 3 toolkit. It uses the version of WDSP that has been ported over to Linux.
Both Protocol 1 and Protocol 2 are supported with up to 7 receivers depending on the HPSDR compatible radio being used.
Discovery
When first started the application will try to discover all the HPSDR compatible radios connected to the network and list them in the window. Each entry in the list will show the device type, the protocol, the protocol version, the IP address of the device,the MAC address of the device, the interface it was found on and it's status.
To start a radio select the required device and click on the Start Radio button.