Difference between revisions of "Phoenix Schematics"

From HPSDRwiki
Jump to: navigation, search
m (Schematics moved to Phoenix Schematics: title more in sync with real content of page)
(No difference)

Revision as of 21:38, 17 May 2009

Schematics

The root sheet schematic Root sheet.gif gives an idea of the overall layout.


Interface Circuit

Interface.gif

The interface Circuit uses a small CPLD as in the other HPSDR modules to map to the bus in a programmable way. It will also allow experimentation with various clock schemes.


DDS circuit DDS.gif The DDS circuit uses the latest device from Analog Devices - the AD9912. This has better SFDR and output freq range than previous devices. I have elected to use a PECL driver for the CPLD and a packaged LPF for convenience.


The DDS requires several regulators for best performance. DDSpower.gif


Mixer/QSDReceiver.gif The Mixer/QSD is based on various comments and sources.It uses the devices proposed originally. The CPLD will be used to generate quadrature signals from the DDS. No preamp/filters have been included at this stage.


QSE QSE.gif The QSE circuit is basically the reverse of the receiver with a low level power amp


Note there is no DDS clock circuit at this point. This is still under development, though a simple crystal oscillator module will be used for prototypes.