Difference between revisions of "VNA Sweeps"

From HPSDRwiki
Jump to: navigation, search
(Created page with "VNA Sweeps * VNA SWR Sweep of PennyWhistle - [http://www.miniradiosolutions.com/miniVNA_PRO.php done with miniVNA Pro]. * Here are the files: - [http://www.westmorelandengi...")
 
(+link)
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
[[VNA Sweeps]]  
 
[[VNA Sweeps]]  
  
* VNA SWR Sweep of PennyWhistle - [http://www.miniradiosolutions.com/miniVNA_PRO.php done with miniVNA Pro].
+
* [[VNA]] SWR Sweep of PennyWhistle - [http://www.miniradiosolutions.com/miniVNA_PRO.php done with miniVNA Pro].
 +
* (For these sweeps, specifically, I was following the instructions in the assembly manual:
 +
('''If you are concerned about your proper assembly of transformer T1, an easy check is to connect an antenna analyzer, such as an MFJ-259 into the input connector (powered off) and you should see a VSWR below 1.5 from 1.8 MHz to 50 MHz, dipping down to 1.2 or lower around 10 MHz.''')
 
* Here are the files: - [http://www.westmorelandengineering.com/OpenHPSDR/VNA_Sweeps/PennyWhistle/VNA_120228_020609.zip zip file of Excel Spreadsheet],  [http://www.westmorelandengineering.com/OpenHPSDR/VNA_Sweeps/PennyWhistle/VNA_120228_020609.xls uncompressed Excel Spreadsheet], [http://www.westmorelandengineering.com/OpenHPSDR/VNA_Sweeps/PennyWhistle/VNA_120228_020609.pdf PDF file of Excel Spreadsheet].
 
* Here are the files: - [http://www.westmorelandengineering.com/OpenHPSDR/VNA_Sweeps/PennyWhistle/VNA_120228_020609.zip zip file of Excel Spreadsheet],  [http://www.westmorelandengineering.com/OpenHPSDR/VNA_Sweeps/PennyWhistle/VNA_120228_020609.xls uncompressed Excel Spreadsheet], [http://www.westmorelandengineering.com/OpenHPSDR/VNA_Sweeps/PennyWhistle/VNA_120228_020609.pdf PDF file of Excel Spreadsheet].
 
* (Contact AJ6BC if you'd like to see this in another file format.)
 
* (Contact AJ6BC if you'd like to see this in another file format.)
 +
 +
[[Category:Vector network analyzer]]

Latest revision as of 11:44, 28 December 2012

VNA Sweeps

  • VNA SWR Sweep of PennyWhistle - done with miniVNA Pro.
  • (For these sweeps, specifically, I was following the instructions in the assembly manual:

(If you are concerned about your proper assembly of transformer T1, an easy check is to connect an antenna analyzer, such as an MFJ-259 into the input connector (powered off) and you should see a VSWR below 1.5 from 1.8 MHz to 50 MHz, dipping down to 1.2 or lower around 10 MHz.)