Difference between revisions of "FAQ"
(General update of FAQ) |
m |
||
| Line 1: | Line 1: | ||
| − | |||
| − | |||
== The HPSDR Project == | == The HPSDR Project == | ||
| − | Q. I have a question that is not covered in this FAQ. How/who do I ask? | + | Q. '''I have a question that is not covered in this FAQ. How/who do I ask?''' |
A. After searching for an answer and not finding it, usually the best way is to post your question on the HPSDR Discussion List (reflector). | A. After searching for an answer and not finding it, usually the best way is to post your question on the HPSDR Discussion List (reflector). | ||
| Line 10: | Line 8: | ||
---- | ---- | ||
| − | Q. How do I get in direct email contact with project leaders? | + | Q. '''How do I get in direct email contact with project leaders?''' |
A. The project leaders are active on the HPSDR Discussion List and you may contact them by posting a message to the list. As an alternative, most project leaders also have an alias email address assigned to them: use their ham call followed by "at" sign and "hpsdr" dot "org". An example of this for W9BQC would be "w9bqc@hpsdr.org". | A. The project leaders are active on the HPSDR Discussion List and you may contact them by posting a message to the list. As an alternative, most project leaders also have an alias email address assigned to them: use their ham call followed by "at" sign and "hpsdr" dot "org". An example of this for W9BQC would be "w9bqc@hpsdr.org". | ||
| Line 16: | Line 14: | ||
---- | ---- | ||
| − | Q. What is the status of the various boards or modules? | + | Q. '''What is the status of the various boards or modules?''' |
A. Here's the scoop on some as of May 1, 2007: | A. Here's the scoop on some as of May 1, 2007: | ||
| Line 31: | Line 29: | ||
---- | ---- | ||
| − | Q. Will the modules be offered in kit or assembled form, and what about cost? | + | Q. '''Will the modules be offered in kit or assembled form, and what about cost?''' |
A. Atlas and Pinocchio are offered as a bare board and kit of parts. Ozy and Janus are offered either bare board or | A. Atlas and Pinocchio are offered as a bare board and kit of parts. Ozy and Janus are offered either bare board or | ||
| Line 38: | Line 36: | ||
---- | ---- | ||
| − | Q. Will Ozy and Janus "bare boards" be available? | + | Q. '''Will Ozy and Janus "bare boards" be available?''' |
A. Bare boards (not kits of parts) are available through TAPR. | A. Bare boards (not kits of parts) are available through TAPR. | ||
| Line 44: | Line 42: | ||
---- | ---- | ||
| − | Q. Why doesn't TAPR offer a kit of parts or at least the hard to obtain parts for Ozy or Janus? | + | Q. '''Why doesn't TAPR offer a kit of parts or at least the hard to obtain parts for Ozy or Janus?''' |
A. A partial kit of harder to obtain parts is being offered for Janus. Potential users may certainly get together for a group buy on other parts needed to complete the boards. There are several reasons for TAPR (or HPSDR) not offering complete kits: (1) being an all-volunteer organization, it would take tremendous manpower to break the parts down to individual kits and package them, (2) there is a very large support problem for kit builders whose boards do not work when completed, and (3) the cost of a kit of parts would be about equal or may exceed the cost of an assembled and tested board. | A. A partial kit of harder to obtain parts is being offered for Janus. Potential users may certainly get together for a group buy on other parts needed to complete the boards. There are several reasons for TAPR (or HPSDR) not offering complete kits: (1) being an all-volunteer organization, it would take tremendous manpower to break the parts down to individual kits and package them, (2) there is a very large support problem for kit builders whose boards do not work when completed, and (3) the cost of a kit of parts would be about equal or may exceed the cost of an assembled and tested board. | ||
| Line 50: | Line 48: | ||
---- | ---- | ||
| − | Q. Will the Gerber files (PCB artwork) be available for anyone's use? | + | Q. '''Will the Gerber files (PCB artwork) be available for anyone's use?''' |
| − | A. Yes. They | + | A. Yes. They are released under the new TAPR open source hardware license called OHL. The board designer may restrict to non-commercial use. The OHL license was finalized and approved in May 2007. See [http://tapr.org/OHL] |
---- | ---- | ||
| − | Q. Why not put OZY and JANUS on a single board? | + | Q. '''Why not put OZY and JANUS on a single board?''' |
A. The overall HPSDR project design philosophy has been to partition the design into modules small enough to allow experimentation | A. The overall HPSDR project design philosophy has been to partition the design into modules small enough to allow experimentation | ||
| Line 65: | Line 63: | ||
---- | ---- | ||
| − | Q. How much better will the Ozy-Janus combination be in terms of performance when used with the SDR-1000 in place of a sound card | + | Q. '''How much better will the Ozy-Janus combination be in terms of performance when used with the SDR-1000 in place of a sound card such as the Delta 44?''' |
| − | such as the Delta 44? | + | |
A. To be determined -- but of course, we expect better results. There are some preliminary results on the wiki and in the discussion list. | A. To be determined -- but of course, we expect better results. There are some preliminary results on the wiki and in the discussion list. | ||
| Line 72: | Line 69: | ||
---- | ---- | ||
| − | Q. Will a Ozy-Janus-Atlas combination work with my PowerSDR software used for my Flex Radio SDR-1000 in place of a sound card in my PC? | + | Q. '''Will a Ozy-Janus-Atlas combination work with my PowerSDR software used for my Flex Radio SDR-1000 in place of a sound card in my PC?''' |
A. Yes, that is one of the early goals of the HPSDR group. Yet to be determined is if the support will be "built in" to the regular | A. Yes, that is one of the early goals of the HPSDR group. Yet to be determined is if the support will be "built in" to the regular | ||
| Line 79: | Line 76: | ||
---- | ---- | ||
| − | Q. Is the HPSDR project going to use Microsoft Windows (R) or some flavor of Linux? | + | Q. '''Is the HPSDR project going to use Microsoft Windows (R) or some flavor of Linux?''' |
A. Yes! | A. Yes! | ||
| Line 85: | Line 82: | ||
---- | ---- | ||
| − | Q. What user name and password do I use to access the HPSDR svn repository? | + | Q. '''What user name and password do I use to access the HPSDR svn repository?''' |
A. None is required for reading the SVN, only required to place something in the repository. The IP address of the repository is shown on the resources page of the main HPSDR.org website. | A. None is required for reading the SVN, only required to place something in the repository. The IP address of the repository is shown on the resources page of the main HPSDR.org website. | ||
| Line 91: | Line 88: | ||
---- | ---- | ||
| − | Q. Will HPSDR be developed for higher frequencies like those used for satellite and space communications, e.g. VHF, UHF and Microwave? | + | Q. '''Will HPSDR be developed for higher frequencies like those used for satellite and space communications, e.g. VHF, UHF and Microwave?''' |
A. There is a group doing SDR for microwave: [http://uwsdr.berlios.de/ ] Current HPSDR projects could certainly be used as an IF for a transverter, but there is nothing going on with HPSDR that is specifically aimed at microwave. | A. There is a group doing SDR for microwave: [http://uwsdr.berlios.de/ ] Current HPSDR projects could certainly be used as an IF for a transverter, but there is nothing going on with HPSDR that is specifically aimed at microwave. | ||
| Line 99: | Line 96: | ||
== The HPSDR Wiki == | == The HPSDR Wiki == | ||
| − | Q. Do I need to register for log in? | + | Q. '''Do I need to register for log in?''' |
A. No! Only those who are active leaders, designers or documentors of various projects need login capability to edit their respective project pages. No login is needed to read any of the wiki. | A. No! Only those who are active leaders, designers or documentors of various projects need login capability to edit their respective project pages. No login is needed to read any of the wiki. | ||
| Line 105: | Line 102: | ||
---- | ---- | ||
| − | Q. What if I find that a correction is needed in the wiki? | + | Q. '''What if I find that a correction is needed in the wiki?''' |
A. Reports such as this are welcomed by the WikiSysOp -- email ae5k at hpsdr dot com with details. | A. Reports such as this are welcomed by the WikiSysOp -- email ae5k at hpsdr dot com with details. | ||
| Line 113: | Line 110: | ||
== ATLAS Backplane == | == ATLAS Backplane == | ||
| − | Q. Will the Atlas be offered assembled? | + | Q. '''Will the Atlas be offered assembled?''' |
A. Probably not. It is fairly easy to assemble with a very minimal amount of surface mount parts. There are quite a few solder pads due to the 96 pin connectors. If you are not able to do this work yourself, our advice is to ask on the HPSDR Discussion List (reflector) to see if you can pay someone to do the work for you. | A. Probably not. It is fairly easy to assemble with a very minimal amount of surface mount parts. There are quite a few solder pads due to the 96 pin connectors. If you are not able to do this work yourself, our advice is to ask on the HPSDR Discussion List (reflector) to see if you can pay someone to do the work for you. | ||
| Line 119: | Line 116: | ||
---- | ---- | ||
| − | Q. Can solder paste and a hot air heat gun (or oven) be used on Atlas for "all those connections" ? | + | Q. '''Can solder paste and a hot air heat gun (or oven) be used on Atlas for "all those connections" ?''' |
A. It is possible, but at least one report indicates problems with the center row on the connectors. If considering doing this, we suggest you ask on the discussion list. If anyone has had success or failure, please report it to the wikisysop so we can update this reply. | A. It is possible, but at least one report indicates problems with the center row on the connectors. If considering doing this, we suggest you ask on the discussion list. If anyone has had success or failure, please report it to the wikisysop so we can update this reply. | ||
| Line 125: | Line 122: | ||
---- | ---- | ||
| − | Q. Will a larger (or smaller?) number of slots version be offered? | + | Q. '''Will a larger (or smaller?) number of slots version be offered?''' |
| − | A. Possibly, if the need and demand warrant. Nothing is in the plans right now (as of | + | A. Possibly, if the need and demand warrant. Nothing is in the plans right now (as of May 2007). |
---- | ---- | ||
| − | Q. I don't see assignment of all the bus pins. Is there a list somewhere? | + | Q. '''I don't see assignment of all the bus pins. Is there a list somewhere?''' |
A. Some are not assigned a function yet, due to the developing nature of the HPSDR project and the use of the FPGA. | A. Some are not assigned a function yet, due to the developing nature of the HPSDR project and the use of the FPGA. | ||
| Line 137: | Line 134: | ||
== PINOCCHIO Extender == | == PINOCCHIO Extender == | ||
| − | Q. Availability? | + | Q. '''Availability?''' |
A. The bare board and connectors are now available from TAPR http://tapr.org | A. The bare board and connectors are now available from TAPR http://tapr.org | ||
| Line 143: | Line 140: | ||
== OZY == | == OZY == | ||
| − | Q. Will the USB connection from Ozy to my PC require anything special in terms of USB port specification or drivers? | + | Q. '''Will the USB connection from Ozy to my PC require anything special in terms of USB port specification or drivers?''' |
A. A USB 2 connection will be required on the PC. Most modern PCs have this as standard. With MS Windows, for the USB driver we are using the LibUsb-Win32 library which is a free download from http://libusb-win32.sourceforge.net/ A Linux version is also available, see http://www.linux-usb.org/ and http://libusb.sourceforge.net/ . Experience will tell us if there are any problems with certain types of USB2 ports. | A. A USB 2 connection will be required on the PC. Most modern PCs have this as standard. With MS Windows, for the USB driver we are using the LibUsb-Win32 library which is a free download from http://libusb-win32.sourceforge.net/ A Linux version is also available, see http://www.linux-usb.org/ and http://libusb.sourceforge.net/ . Experience will tell us if there are any problems with certain types of USB2 ports. | ||
| Line 149: | Line 146: | ||
---- | ---- | ||
| − | Q. Why do we need a "configuration device" when the software can just load the FPGA via USB and the Cypress CY7C68013 (FX2) chip? The schematic shows the programming pins connected from FX2 GPIO pins to FPGA. | + | Q. '''Why do we need a "configuration device" when the software can just load the FPGA via USB and the Cypress CY7C68013 (FX2) chip? The schematic shows the programming pins connected from FX2 GPIO pins to FPGA.''' |
A. It does load via USB and this is how OZY is normally used. BUT, there will come a time when someone wants to use the OZY without PC attached and the configuraton device allows this possibility. | A. It does load via USB and this is how OZY is normally used. BUT, there will come a time when someone wants to use the OZY without PC attached and the configuraton device allows this possibility. | ||
| Line 155: | Line 152: | ||
---- | ---- | ||
| − | Q. Is the design of Ozy such that it can be used for other purposes than SDR? | + | Q. '''Is the design of Ozy such that it can be used for other purposes than SDR?''' |
A. We certainly hope so and expect that some will use it as a learning tool or development platform for other projects not even remotely related to SDR. It provides an inexpensive piece of hardware for many purposes. | A. We certainly hope so and expect that some will use it as a learning tool or development platform for other projects not even remotely related to SDR. It provides an inexpensive piece of hardware for many purposes. | ||
| Line 163: | Line 160: | ||
== JANUS == | == JANUS == | ||
| − | Q. Is Janus a "sound card" ? | + | Q. '''Is Janus a "sound card" ?''' |
A. NO! The usual meaning of a sound card is one which plugs into a personal computer (ISA, PCI, or other bus). The Janus module plugs into our Atlas bus and contains some of the components of the usual sound card. It also requires the Ozy or similar interface to use it in applications which call for a PC sound card. | A. NO! The usual meaning of a sound card is one which plugs into a personal computer (ISA, PCI, or other bus). The Janus module plugs into our Atlas bus and contains some of the components of the usual sound card. It also requires the Ozy or similar interface to use it in applications which call for a PC sound card. | ||
| Line 169: | Line 166: | ||
---- | ---- | ||
| − | Q. Will I be able to use Janus for other non-SDR sound applications with my PC? | + | Q. '''Will I be able to use Janus for other non-SDR sound applications with my PC?''' |
A. In theory, Yes! This will require a Windows or Linux driver; there is no reason one can't be written, we just need a volunteer! | A. In theory, Yes! This will require a Windows or Linux driver; there is no reason one can't be written, we just need a volunteer! | ||
Revision as of 05:41, 22 May 2007
Contents
The HPSDR Project
Q. I have a question that is not covered in this FAQ. How/who do I ask?
A. After searching for an answer and not finding it, usually the best way is to post your question on the HPSDR Discussion List (reflector). This allows two things to happen: (1) it permits someone other than the very busy developers to answer the question if they can, and (2) it allows everyone on the list to gain the benefit of any reply.
Q. How do I get in direct email contact with project leaders?
A. The project leaders are active on the HPSDR Discussion List and you may contact them by posting a message to the list. As an alternative, most project leaders also have an alias email address assigned to them: use their ham call followed by "at" sign and "hpsdr" dot "org". An example of this for W9BQC would be "w9bqc@hpsdr.org".
Q. What is the status of the various boards or modules?
A. Here's the scoop on some as of May 1, 2007:
ATLAS - in production, order through http://tapr.org PINOCCHIO - in production, order through http://tapr.org (may be "out of stock"), another run TBD. OZY - 1st production run - currently being shipped. Order through http://tapr.org JANUS - 1st production run - currently being shipped. Order through http://tapr.org MERCURY - alpha PENELOPE - alpha
All others - in various stages of design/development -- see their wiki pages.
Q. Will the modules be offered in kit or assembled form, and what about cost?
A. Atlas and Pinocchio are offered as a bare board and kit of parts. Ozy and Janus are offered either bare board or assembled and tested. A hard to get partial parts kit is being offered or Janus. Future module costs to be determined.
Q. Will Ozy and Janus "bare boards" be available?
A. Bare boards (not kits of parts) are available through TAPR.
Q. Why doesn't TAPR offer a kit of parts or at least the hard to obtain parts for Ozy or Janus?
A. A partial kit of harder to obtain parts is being offered for Janus. Potential users may certainly get together for a group buy on other parts needed to complete the boards. There are several reasons for TAPR (or HPSDR) not offering complete kits: (1) being an all-volunteer organization, it would take tremendous manpower to break the parts down to individual kits and package them, (2) there is a very large support problem for kit builders whose boards do not work when completed, and (3) the cost of a kit of parts would be about equal or may exceed the cost of an assembled and tested board.
Q. Will the Gerber files (PCB artwork) be available for anyone's use?
A. Yes. They are released under the new TAPR open source hardware license called OHL. The board designer may restrict to non-commercial use. The OHL license was finalized and approved in May 2007. See [1]
Q. Why not put OZY and JANUS on a single board?
A. The overall HPSDR project design philosophy has been to partition the design into modules small enough to allow experimentation with part and design changes and to be able to put together a system meeting individual needs. Putting the ADC chip with associated circuit on the Janus board allows a future (and hopefully better) chip to be used on a similar board, but keeping Ozy for the interface and control. Flexibility is the goal.
Q. How much better will the Ozy-Janus combination be in terms of performance when used with the SDR-1000 in place of a sound card such as the Delta 44?
A. To be determined -- but of course, we expect better results. There are some preliminary results on the wiki and in the discussion list.
Q. Will a Ozy-Janus-Atlas combination work with my PowerSDR software used for my Flex Radio SDR-1000 in place of a sound card in my PC?
A. Yes, that is one of the early goals of the HPSDR group. Yet to be determined is if the support will be "built in" to the regular Flex Radio's release of PowerSDR or if it will take a special version of it. And yes, it works on tests done so far.
Q. Is the HPSDR project going to use Microsoft Windows (R) or some flavor of Linux?
A. Yes!
Q. What user name and password do I use to access the HPSDR svn repository?
A. None is required for reading the SVN, only required to place something in the repository. The IP address of the repository is shown on the resources page of the main HPSDR.org website.
Q. Will HPSDR be developed for higher frequencies like those used for satellite and space communications, e.g. VHF, UHF and Microwave?
A. There is a group doing SDR for microwave: [2] Current HPSDR projects could certainly be used as an IF for a transverter, but there is nothing going on with HPSDR that is specifically aimed at microwave.
The HPSDR Wiki
Q. Do I need to register for log in?
A. No! Only those who are active leaders, designers or documentors of various projects need login capability to edit their respective project pages. No login is needed to read any of the wiki.
Q. What if I find that a correction is needed in the wiki?
A. Reports such as this are welcomed by the WikiSysOp -- email ae5k at hpsdr dot com with details.
ATLAS Backplane
Q. Will the Atlas be offered assembled?
A. Probably not. It is fairly easy to assemble with a very minimal amount of surface mount parts. There are quite a few solder pads due to the 96 pin connectors. If you are not able to do this work yourself, our advice is to ask on the HPSDR Discussion List (reflector) to see if you can pay someone to do the work for you.
Q. Can solder paste and a hot air heat gun (or oven) be used on Atlas for "all those connections" ?
A. It is possible, but at least one report indicates problems with the center row on the connectors. If considering doing this, we suggest you ask on the discussion list. If anyone has had success or failure, please report it to the wikisysop so we can update this reply.
Q. Will a larger (or smaller?) number of slots version be offered?
A. Possibly, if the need and demand warrant. Nothing is in the plans right now (as of May 2007).
Q. I don't see assignment of all the bus pins. Is there a list somewhere?
A. Some are not assigned a function yet, due to the developing nature of the HPSDR project and the use of the FPGA.
PINOCCHIO Extender
Q. Availability?
A. The bare board and connectors are now available from TAPR http://tapr.org
OZY
Q. Will the USB connection from Ozy to my PC require anything special in terms of USB port specification or drivers?
A. A USB 2 connection will be required on the PC. Most modern PCs have this as standard. With MS Windows, for the USB driver we are using the LibUsb-Win32 library which is a free download from http://libusb-win32.sourceforge.net/ A Linux version is also available, see http://www.linux-usb.org/ and http://libusb.sourceforge.net/ . Experience will tell us if there are any problems with certain types of USB2 ports.
Q. Why do we need a "configuration device" when the software can just load the FPGA via USB and the Cypress CY7C68013 (FX2) chip? The schematic shows the programming pins connected from FX2 GPIO pins to FPGA.
A. It does load via USB and this is how OZY is normally used. BUT, there will come a time when someone wants to use the OZY without PC attached and the configuraton device allows this possibility.
Q. Is the design of Ozy such that it can be used for other purposes than SDR?
A. We certainly hope so and expect that some will use it as a learning tool or development platform for other projects not even remotely related to SDR. It provides an inexpensive piece of hardware for many purposes.
JANUS
Q. Is Janus a "sound card" ?
A. NO! The usual meaning of a sound card is one which plugs into a personal computer (ISA, PCI, or other bus). The Janus module plugs into our Atlas bus and contains some of the components of the usual sound card. It also requires the Ozy or similar interface to use it in applications which call for a PC sound card.
Q. Will I be able to use Janus for other non-SDR sound applications with my PC?
A. In theory, Yes! This will require a Windows or Linux driver; there is no reason one can't be written, we just need a volunteer!
MERCURY
PENELOPE
Miscellaneous
Project leaders: feel free to contribute answers -- especially where it says "TBD" (email to AE5K).
General Readership: have a question that should be here? Email AE5K specifically mentioning the wiki FAQ.
