Ghpsdr3 dspserver

From HPSDRwiki
Revision as of 13:50, 5 September 2010 by KV0S (Talk | contribs) (New page: The dspserver program is used to separate the DSP components from the GUI components. dspserver accepts the following command on the command line. '''--receiver 0|1|2|3 (default 0)''' ...)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The dspserver program is used to separate the DSP components from the GUI components.


dspserver accepts the following command on the command line.

--receiver 0|1|2|3 (default 0)

receiver that this client is attached to (Please note singular). Also please not that receivers are 0 based.

--server 0.0.0.0 (default 127.0.0.1)

ip address of the server machine. Default is the localhost (127.0.0.1).

--soundcard name (depends on your machine)

--offset 0