The Tokyo Hy-Power HL-45B Solution

From HPSDRwiki
Revision as of 20:13, 4 October 2009 by W9KFB (Talk | contribs) (Add info on the FCC data base on the HL-45B)

Jump to: navigation, search
Figure #1. The measured gain of the HL-45B HF/6 Meter Amplifier
Figure #2. The measured power output of the HL-45B HF/6 Meter Amplifier at 13.8 Volts
Figure #3. A comparison of the HL-45B HF/6 Meter Amplifier power output to the PenneyWhistle power output when both are operated at 13.8 Volts

The HL-45B is a small compact HF and 6 meter amplifier capable of 45 Watts output on all modes. Band switching is manual, but all required low pass filters are included. Because it requires 5 Watts input to drive it to full power, detailed construction notes are provided to provide a small preamp between the Penelope and HL-45B. Specifications and other information on the Tokyo Hy-Power labs' HL-45B are available at Tokyo Hy-Power's web site. Dick Faust, K9IVB, recommended that we use the FCC data on the HL-45B, if you use the links, you will probably need to rename the files to a name ending with ".pdp" and possibly download the Japanese fonts as requested by the Adobe Reader. The files were readable using Acrobat 9 using the view all files selection on my Mac. Here is the linkFCC files on the Tokyo Hy-Power HL-45B. Dick also mentioned "The schematic shows a 2db pad and the circuit description indicates 3db - might be able to short out and drive directly with Penny". Please let us know if this improves the solution if anyone tries it. Also we are looking for a way to interface PowerSDR with the band changing circuits in the HL-45B. If enough hams are interested, we could put this on our PowerSDR wish list.

The measured Gain of this amplifier is shown in Figure #1.

The Direct Connection Option

Phil Crosno, N6AS, did the initial work on the selection of this amplifier to provide additional power output for a HPSDR rig. His power output of a directly connected HL-45B to a Penelope/Mercury based transceiver is shown in Figure #2. Comparison of the HL-45B to the power output of the PenneyWhistle is shown in Figure #3 (using Penelope as the driver at 13.8 Volts in both cases).


The Full Output Option

David Poole, AD9DP, has developed a single transistor interface circuit that goes between the current Penelope/Mercury HPSDR components to drive the HL-45B to full power. Up to 70 watts output is obtained on the HF bands and 20 watts is achieved on 6 meters. Details on construction of this interface will be posted here as soon as testing is complete.