Difference between revisions of "Using JT65HF on Microsoft Windows XP, Vista, or Windows 7"
From HPSDRwiki
m (correceted grammer) |
(Added step 4) |
||
| Line 6: | Line 6: | ||
3. Install Virtual Audio Cable (VAC). Follow FlexRadio instructions at: [http://kc.flex-radio.com/KnowledgebaseArticle50230.aspx How to Setup Virtual Audio Cable (VAC) 4.0x with PowerSDR 1.x] | 3. Install Virtual Audio Cable (VAC). Follow FlexRadio instructions at: [http://kc.flex-radio.com/KnowledgebaseArticle50230.aspx How to Setup Virtual Audio Cable (VAC) 4.0x with PowerSDR 1.x] | ||
| + | |||
| + | 4. Change the calibration values as described in the FlexRadio Knowledge Base article:[http://kc.flex-radio.com/KnowledgebaseArticle50362.aspx How to Configure WSJT with PowerSDR and VAC] | ||
(Under construction) | (Under construction) | ||
[[Category:PowerSDR]] | [[Category:PowerSDR]] | ||
Revision as of 13:10, 26 October 2010
This program is required for operating the HF weak signal digital modes. Follow the recommended settings given below and you should not have any problems.
1. Download the JT65HF set-up file (.exe) from Download setupJT65-HF1060.exe
2. Download and follow the latest version of the Set-Up instructions from the JT65HF Setup and Use Guide.
3. Install Virtual Audio Cable (VAC). Follow FlexRadio instructions at: How to Setup Virtual Audio Cable (VAC) 4.0x with PowerSDR 1.x
4. Change the calibration values as described in the FlexRadio Knowledge Base article:How to Configure WSJT with PowerSDR and VAC
(Under construction)
