Difference between revisions of "Using JT65HF on Microsoft Windows XP, Vista, or Windows 7"

From HPSDRwiki
Jump to: navigation, search
(Finished JT-65 HF set up directions.)
(Added Com0Com usage)
Line 2: Line 2:
  
 
1. Download the JT65HF set-up file (.exe) from [http://sourceforge.net/projects/jt65-hf/files/setupJT65-HF1060.exe/download Download setupJT65-HF1060.exe]
 
1. Download the JT65HF set-up file (.exe) from [http://sourceforge.net/projects/jt65-hf/files/setupJT65-HF1060.exe/download Download setupJT65-HF1060.exe]
 +
 +
2. Install at least two sets of com0com ports for use with PTT and frequency control. [http://sourceforge.net/projects/com0com/ Learn about and install com0com].
  
 
2. Download  and follow the latest version of the Set-Up instructions from the [[Media: Jt65-hf-setup.pdf|JT65HF Setup and Use Guide]].
 
2. Download  and follow the latest version of the Set-Up instructions from the [[Media: Jt65-hf-setup.pdf|JT65HF Setup and Use Guide]].
Line 13: Line 15:
 
4. Change the calibration values as described in the FlexRadio Knowledge Base article:[http://kc.flex-radio.com/KnowledgebaseArticle50362.aspx How to Configure WSJT with PowerSDR and VAC]
 
4. Change the calibration values as described in the FlexRadio Knowledge Base article:[http://kc.flex-radio.com/KnowledgebaseArticle50362.aspx How to Configure WSJT with PowerSDR and VAC]
  
(Under construction)
 
  
 
[[Category:PowerSDR]]
 
[[Category:PowerSDR]]

Revision as of 07:49, 27 October 2010

This program is required for operating the HF weak signal digital modes. Follow the recommended settings given below and you should not have any problems.

1. Download the JT65HF set-up file (.exe) from Download setupJT65-HF1060.exe

2. Install at least two sets of com0com ports for use with PTT and frequency control. Learn about and install com0com.

2. Download and follow the latest version of the Set-Up instructions from the JT65HF Setup and Use Guide.

a. Before testing the PTT button, be sure that "DTR" is checked. The alternative PTT method is not required.

b. For best decoding of weak signals, PowerSDR's AGC should be set to custom and the AGC-T adjusted for 0dB audio input level.

3. Install Virtual Audio Cable (VAC). Follow FlexRadio instructions at: How to Setup Virtual Audio Cable (VAC) 4.0x with PowerSDR 1.x

4. Change the calibration values as described in the FlexRadio Knowledge Base article:How to Configure WSJT with PowerSDR and VAC