Using JT65HF on Microsoft Windows XP, Vista, or Windows 7

From HPSDRwiki
Revision as of 11:39, 26 October 2010 by W9KFB (Talk | contribs) (changed location of set-up guide to local)

Jump to: navigation, search

his program is required operating on the HF weak signal digital modes. Follow the recommended settings given below and you should not have any problems.

1. Download and follow the latest version of the Set-Up instructions for JT65HF from the [Image:Jt65-hf-setup.pdf JT65HF Setup and Use Guide].

2. Install Virtual Audio Cable (VAC). Follow FlexRadio instructions at: How to Setup Virtual Audio Cable (VAC) 4.0x with PowerSDR 1.x

(Under construction)