Using JT65HF on Microsoft Windows XP, Vista, or Windows 7
This program is required for operating the HF weak signal digital modes. Follow the recommended settings given below and you should not have any problems.
1. Download the JT65HF set-up file (.exe) from Download setupJT65-HF1060.exe
2. Download and follow the latest version of the Set-Up instructions from the JT65HF Setup and Use Guide.
3. Install Virtual Audio Cable (VAC). Follow FlexRadio instructions at: How to Setup Virtual Audio Cable (VAC) 4.0x with PowerSDR 1.x
4. Change the calibration values as described in the FlexRadio Knowledge Base article:How to Configure WSJT with PowerSDR and VAC