Difference between revisions of "VNA Sweeps"
From HPSDRwiki
(Created page with "VNA Sweeps * VNA SWR Sweep of PennyWhistle - [http://www.miniradiosolutions.com/miniVNA_PRO.php done with miniVNA Pro]. * Here are the files: - [http://www.westmorelandengi...") |
m (→just adding detail on how and what the sweep was specifically run on) |
||
Line 2: | Line 2: | ||
* VNA SWR Sweep of PennyWhistle - [http://www.miniradiosolutions.com/miniVNA_PRO.php done with miniVNA Pro]. | * VNA SWR Sweep of PennyWhistle - [http://www.miniradiosolutions.com/miniVNA_PRO.php done with miniVNA Pro]. | ||
+ | * (For these sweeps, specifically, I was following the instructions in the assembly manual: | ||
+ | ('''If you are concerned about your proper assembly of transformer T1, an easy check is to connect an antenna analyzer, such as an MFJ-259 into the input connector (powered off) and you should see a VSWR below 1.5 from 1.8 MHz to 50 MHz, dipping down to 1.2 or lower around 10 MHz.''') | ||
* Here are the files: - [http://www.westmorelandengineering.com/OpenHPSDR/VNA_Sweeps/PennyWhistle/VNA_120228_020609.zip zip file of Excel Spreadsheet], [http://www.westmorelandengineering.com/OpenHPSDR/VNA_Sweeps/PennyWhistle/VNA_120228_020609.xls uncompressed Excel Spreadsheet], [http://www.westmorelandengineering.com/OpenHPSDR/VNA_Sweeps/PennyWhistle/VNA_120228_020609.pdf PDF file of Excel Spreadsheet]. | * Here are the files: - [http://www.westmorelandengineering.com/OpenHPSDR/VNA_Sweeps/PennyWhistle/VNA_120228_020609.zip zip file of Excel Spreadsheet], [http://www.westmorelandengineering.com/OpenHPSDR/VNA_Sweeps/PennyWhistle/VNA_120228_020609.xls uncompressed Excel Spreadsheet], [http://www.westmorelandengineering.com/OpenHPSDR/VNA_Sweeps/PennyWhistle/VNA_120228_020609.pdf PDF file of Excel Spreadsheet]. | ||
* (Contact AJ6BC if you'd like to see this in another file format.) | * (Contact AJ6BC if you'd like to see this in another file format.) |
Revision as of 21:33, 4 March 2012
VNA Sweeps
- VNA SWR Sweep of PennyWhistle - done with miniVNA Pro.
- (For these sweeps, specifically, I was following the instructions in the assembly manual:
(If you are concerned about your proper assembly of transformer T1, an easy check is to connect an antenna analyzer, such as an MFJ-259 into the input connector (powered off) and you should see a VSWR below 1.5 from 1.8 MHz to 50 MHz, dipping down to 1.2 or lower around 10 MHz.)
- Here are the files: - zip file of Excel Spreadsheet, uncompressed Excel Spreadsheet, PDF file of Excel Spreadsheet.
- (Contact AJ6BC if you'd like to see this in another file format.)