Difference between revisions of "VNA Sweeps"

From HPSDRwiki
Jump to: navigation, search
m (just adding detail on how and what the sweep was specifically run on)
(+link)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
[[VNA Sweeps]]  
 
[[VNA Sweeps]]  
  
* VNA SWR Sweep of PennyWhistle - [http://www.miniradiosolutions.com/miniVNA_PRO.php done with miniVNA Pro].
+
* [[VNA]] SWR Sweep of PennyWhistle - [http://www.miniradiosolutions.com/miniVNA_PRO.php done with miniVNA Pro].
 
* (For these sweeps, specifically, I was following the instructions in the assembly manual:
 
* (For these sweeps, specifically, I was following the instructions in the assembly manual:
 
('''If you are concerned about your proper assembly of transformer T1, an easy check is to connect an antenna analyzer, such as an MFJ-259 into the input connector (powered off) and you should see a VSWR below 1.5 from 1.8 MHz to 50 MHz, dipping down to 1.2 or lower around 10 MHz.''')
 
('''If you are concerned about your proper assembly of transformer T1, an easy check is to connect an antenna analyzer, such as an MFJ-259 into the input connector (powered off) and you should see a VSWR below 1.5 from 1.8 MHz to 50 MHz, dipping down to 1.2 or lower around 10 MHz.''')
 
* Here are the files: - [http://www.westmorelandengineering.com/OpenHPSDR/VNA_Sweeps/PennyWhistle/VNA_120228_020609.zip zip file of Excel Spreadsheet],  [http://www.westmorelandengineering.com/OpenHPSDR/VNA_Sweeps/PennyWhistle/VNA_120228_020609.xls uncompressed Excel Spreadsheet], [http://www.westmorelandengineering.com/OpenHPSDR/VNA_Sweeps/PennyWhistle/VNA_120228_020609.pdf PDF file of Excel Spreadsheet].
 
* Here are the files: - [http://www.westmorelandengineering.com/OpenHPSDR/VNA_Sweeps/PennyWhistle/VNA_120228_020609.zip zip file of Excel Spreadsheet],  [http://www.westmorelandengineering.com/OpenHPSDR/VNA_Sweeps/PennyWhistle/VNA_120228_020609.xls uncompressed Excel Spreadsheet], [http://www.westmorelandengineering.com/OpenHPSDR/VNA_Sweeps/PennyWhistle/VNA_120228_020609.pdf PDF file of Excel Spreadsheet].
 
* (Contact AJ6BC if you'd like to see this in another file format.)
 
* (Contact AJ6BC if you'd like to see this in another file format.)
 +
 +
[[Category:Vector network analyzer]]

Latest revision as of 12:44, 28 December 2012

VNA Sweeps

  • VNA SWR Sweep of PennyWhistle - done with miniVNA Pro.
  • (For these sweeps, specifically, I was following the instructions in the assembly manual:

(If you are concerned about your proper assembly of transformer T1, an easy check is to connect an antenna analyzer, such as an MFJ-259 into the input connector (powered off) and you should see a VSWR below 1.5 from 1.8 MHz to 50 MHz, dipping down to 1.2 or lower around 10 MHz.)