[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Xylo-SDR] Questions - Enclosure - MB - Kicad
Bob
So far the ONLY non Digi-Key off the shelf part I am suggesting is the
enclosure. It meets both horizontal and vertical EuroBus standards.
Eric
-----Original Message-----
From: xylo-sdr-bounces@lists.ae5k.us [mailto:xylo-sdr-bounces@lists.ae5k.us]
On Behalf Of Robert McGwier
Sent: Saturday, January 14, 2006 1:51 PM
To: Xylo-SDR Discussion
Subject: Re: [Xylo-SDR] Questions - Enclosure - MB - Kicad
I am with Lyle. PLEASE let's adopt standard connectors and controls
that are available from standard sources in small quantities and mounted
on the circuit board! I don't need a full kit. What I need is to not
have to figure, scrounge, drill, saw, poke, curse, ... I just don't
have time and I am trying to quit (the latter).
Bob
N4HY
Lyle Johnson wrote:
>>I therefore propose that we increase the proposed project card size from
2x4
>>to 4x4 which is a 'happy medium' which Phil suggests below. This also
allows
>>for Phil - VK6APH BPF board, A Jupiter GPS receiver etc. For 'Dead Bug'
>>expeimenters like Bill - KD5TFD, he could use a 4x6 full length card and
>>have 2" sticking out the front for experimenting without a card extender.
It
>>also allows us to get on with Motherboard design with a maximum vertical
>>dimension of 96 mm. (case height between lands). I propose the motherboard
>>height dimension be the the size of the 96 pin mating connector (3.7").
The
>>holes in the connector will mate with standoffs for rigidity.
>>
>>I think a 4x6x4 enclosure would make a cute little radio!
>>
>>
>
>I think that the ability to put the connectors, controls, etc. on the
>PCB is a huge benefit for repeatability and reliability of whatever this
>group builds.
>
>
>
----snip -----
>Another thought: the motherboard could be sized such that its PC board
>forms the backplate of the enclosure. Downside is exposed connector
>tails -- or maybe that is a plus for having exposed test points?
>
>73,
>
>Lyle KK7P
>
>
>
--
AMSAT VP Engineering. Member: ARRL, AMSAT-DL, TAPR, Packrats,
NJQRP/AMQRP, QRP ARCI, QCWA, FRC. ARRL SDR Wrk Grp Chairman
Laziness is the number one inspiration for ingenuity. Guilty as charged!
_______________________________________________
Xylo-SDR mailing list
To post msg: Xylo-SDR@ae5k.us
Subscription help: http://lists.ae5k.us/listinfo.cgi/xylo-sdr-ae5k.us
Xylo-SDR web page: http://xylo-sdr.ae5k.us
Forum pages: http://www.hamsdr.com/hamsdrforum/