Difference between revisions of "HERMES"
From HPSDRwiki
(New page: ''' == Hermes - A DUC/DDC Transceiver == ''' Project Leader: Kevin M0KHZ) |
|||
| Line 4: | Line 4: | ||
Project Leader: Kevin M0KHZ | Project Leader: Kevin M0KHZ | ||
| + | |||
| + | Building on the success of Penelope and Mercury, Hermes will combine to two functions onto a single board to produce an HF (160-6m) Digital Down Conversion – Digital Up Conversion Transceiver. | ||
| + | |||
| + | Potential features at the moment include: | ||
| + | - IDC Header to enable the use of the Alex HPF/LPF board | ||
| + | - Onboard 10MHz TCXO with provision for an external input also | ||
| + | - A Pennywhistle type of amplifier with 15w output | ||
| + | - Microphone, headset, loudspeaker connections | ||
| + | - 13.5v DC input | ||
| + | - Open collector outputs for external relay/equipment control | ||
| + | - Euro- card size PCB (160mm x 100mm) | ||
Revision as of 23:12, 10 April 2009
Hermes - A DUC/DDC Transceiver
Project Leader: Kevin M0KHZ
Building on the success of Penelope and Mercury, Hermes will combine to two functions onto a single board to produce an HF (160-6m) Digital Down Conversion – Digital Up Conversion Transceiver.
Potential features at the moment include: - IDC Header to enable the use of the Alex HPF/LPF board - Onboard 10MHz TCXO with provision for an external input also - A Pennywhistle type of amplifier with 15w output - Microphone, headset, loudspeaker connections - 13.5v DC input - Open collector outputs for external relay/equipment control - Euro- card size PCB (160mm x 100mm)
