Difference between revisions of "The Tokyo Hy-Power HL-45B Solution"
From HPSDRwiki
(the Direct connection option) |
(→The Direct Connection Option: Insert tex about figures...) |
||
| Line 1: | Line 1: | ||
===The Direct Connection Option=== | ===The Direct Connection Option=== | ||
| − | Phil Crosno, N6AS, did the initial work on the selection of this amplifier to provide additional power output for a HPSDR rig. His power output of a directly connected HL- | + | |
| + | Specifications and other information on the Tokyo Hy-Power labs' HL-45B is available at [http://www.thp.co.jp/english/hl_45b_e.html Tokyo Hy-Power's web site]. The measured Gain of this amplifier is shown in Figure #1. | ||
| + | Phil Crosno, N6AS, did the initial work on the selection of this amplifier to provide additional power output for a HPSDR rig. His power output of a directly connected HL-45B to a Penelope/Mercury based transceiver is shown in Figure #2. Comparison of the HL-45B to the power output of the PenneyWhistle is shown in Figure #3 (using Penelope as the driver at 13.6 Volts in both cases). | ||
Revision as of 07:41, 29 September 2009
The Direct Connection Option
Specifications and other information on the Tokyo Hy-Power labs' HL-45B is available at Tokyo Hy-Power's web site. The measured Gain of this amplifier is shown in Figure #1. Phil Crosno, N6AS, did the initial work on the selection of this amplifier to provide additional power output for a HPSDR rig. His power output of a directly connected HL-45B to a Penelope/Mercury based transceiver is shown in Figure #2. Comparison of the HL-45B to the power output of the PenneyWhistle is shown in Figure #3 (using Penelope as the driver at 13.6 Volts in both cases).
