Difference between revisions of "The Tokyo Hy-Power HL-45B Solution"

Revision as of 07:57, 29 September 2009 (view source) W9KFB (Talk | contribs) m (→‎The Direct Connection Option) ← Older edit		Revision as of 11:54, 29 September 2009 (view source) W9KFB (Talk | contribs) (→‎The Direct Connection Option: Changed voltages to 13.8 Volts) Newer edit →
Line 2:		Line 2:
	Specifications and other information on the Tokyo Hy-Power labs' HL-45B is available at [http://www.thp.co.jp/english/hl_45b_e.html Tokyo Hy-Power's web site]. The measured Gain of this amplifier is shown in Figure #1. [[Image:0001ii.jpg|thumb|300px|Figure #1. The measured gain of the HL-45B HF/6 Meter Amplifier]]		Specifications and other information on the Tokyo Hy-Power labs' HL-45B is available at [http://www.thp.co.jp/english/hl_45b_e.html Tokyo Hy-Power's web site]. The measured Gain of this amplifier is shown in Figure #1. [[Image:0001ii.jpg|thumb|300px|Figure #1. The measured gain of the HL-45B HF/6 Meter Amplifier]]
−	Phil Crosno, N6AS, did the initial work on the selection of this amplifier to provide additional power output for a HPSDR rig. His power output of a directly connected HL-45B to a Penelope/Mercury based transceiver is shown in Figure #2. Comparison of the HL-45B to the power output of the PenneyWhistle is shown in Figure #3 (using Penelope as the driver at 13.6 Volts in both cases).[[Image:0001gz.jpg|thumb|300px|Figure #2. The measured power output of the HL-45B HF/6 Meter Amplifier at 13.6 Volts]]	+	Phil Crosno, N6AS, did the initial work on the selection of this amplifier to provide additional power output for a HPSDR rig. His power output of a directly connected HL-45B to a Penelope/Mercury based transceiver is shown in Figure #2. Comparison of the HL-45B to the power output of the PenneyWhistle is shown in Figure #3 (using Penelope as the driver at 13.8 Volts in both cases).[[Image:0001gz.jpg|thumb|300px|Figure #2. The measured power output of the HL-45B HF/6 Meter Amplifier at 13.8 Volts]]
−	[[Image:0001vl.jpg|thumb|300px|Figure #3. A comparison of the HL-45B HF/6 Meter Amplifier power output to the PenneyWhistle power output when both are operated at 13.6 Volts]]	+	[[Image:0001vl.jpg|thumb|300px|Figure #3. A comparison of the HL-45B HF/6 Meter Amplifier power output to the PenneyWhistle power output when both are operated at 13.8 Volts]]

---

Revision as of 11:54, 29 September 2009

The Direct Connection Option

Specifications and other information on the Tokyo Hy-Power labs' HL-45B is available at Tokyo Hy-Power's web site. The measured Gain of this amplifier is shown in Figure #1. Phil Crosno, N6AS, did the initial work on the selection of this amplifier to provide additional power output for a HPSDR rig. His power output of a directly connected HL-45B to a Penelope/Mercury based transceiver is shown in Figure #2. Comparison of the HL-45B to the power output of the PenneyWhistle is shown in Figure #3 (using Penelope as the driver at 13.8 Volts in both cases).