Difference between revisions of "VNA Sweeps"

From HPSDRwiki
Jump to: navigation, search
(+link)
 
Line 1: Line 1:
 
[[VNA Sweeps]]  
 
[[VNA Sweeps]]  
  
* VNA SWR Sweep of PennyWhistle - [http://www.miniradiosolutions.com/miniVNA_PRO.php done with miniVNA Pro].
+
* [[VNA]] SWR Sweep of PennyWhistle - [http://www.miniradiosolutions.com/miniVNA_PRO.php done with miniVNA Pro].
 
* (For these sweeps, specifically, I was following the instructions in the assembly manual:
 
* (For these sweeps, specifically, I was following the instructions in the assembly manual:
 
('''If you are concerned about your proper assembly of transformer T1, an easy check is to connect an antenna analyzer, such as an MFJ-259 into the input connector (powered off) and you should see a VSWR below 1.5 from 1.8 MHz to 50 MHz, dipping down to 1.2 or lower around 10 MHz.''')
 
('''If you are concerned about your proper assembly of transformer T1, an easy check is to connect an antenna analyzer, such as an MFJ-259 into the input connector (powered off) and you should see a VSWR below 1.5 from 1.8 MHz to 50 MHz, dipping down to 1.2 or lower around 10 MHz.''')

Latest revision as of 11:44, 28 December 2012

VNA Sweeps

  • VNA SWR Sweep of PennyWhistle - done with miniVNA Pro.
  • (For these sweeps, specifically, I was following the instructions in the assembly manual:

(If you are concerned about your proper assembly of transformer T1, an easy check is to connect an antenna analyzer, such as an MFJ-259 into the input connector (powered off) and you should see a VSWR below 1.5 from 1.8 MHz to 50 MHz, dipping down to 1.2 or lower around 10 MHz.)