Difference between revisions of "PiHPSDR compile ubuntu"
From HPSDRwiki
(→PiHPSDR - Compiling on Ubuntu 20.10 64 bit) |
(→PiHPSDR - Setting up and compiling on Ubuntu 20.10 64 bit) |
||
| Line 33: | Line 33: | ||
<pre>dtparams=spi=off</pre> | <pre>dtparams=spi=off</pre> | ||
| + | |||
| + | === Reboot system === | ||
| + | |||
| + | Reboot the system to have the gpio group changes and the SPI interface changes have effect. | ||
| + | |||
| + | == Fetch WDSP and piHPSDR source code | ||
| + | |||
| + | <pre>git clone</pre> | ||
Revision as of 07:36, 3 December 2020
Contents
[hide]PiHPSDR - Setting up and compiling on Ubuntu 20.10 64 bit
Install System Reqirements
sudo apt install build-essential git
Install piHPSDR prerequisites
sudo apt install libfftw3-dev libgtk-3-dev libasound2-dev libusb-1.0-0-dev libgpiod-dev libi2c-dev
Setup gpio group
Installing libi2c-dev creates a group i2c but installing libgpiod-dev does not create the gpio group.
sudo addgroup --system gpio
sudo adduser $USER gpio
Set gpio ownership and permissions on bootup
Create /etc/udev/rules.d/90-gpio.rules with:
KERNEL=="gpio*", OWNER="root", GROUP="gpio", MODE="660"
Disable SPI interface
Edit /boot/firmware/config.txt and find the line with:
dtparams=spi=on
and change to:
dtparams=spi=off
Reboot system
Reboot the system to have the gpio group changes and the SPI interface changes have effect.
== Fetch WDSP and piHPSDR source code
git clone
