[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xylo-SDR] Enclosure Drawing



Cecil

Got it. Looks nice. Something wrong with the dwg files since the lettering
is too big. I had one of our engineers print me 11 x 17 this moringing and
lettering was same way. I didn't have time to work with him to correct. I
don't have an Autocad license.

Eric


-----Original Message-----
From: xylo-sdr-bounces@lists.ae5k.us [mailto:xylo-sdr-bounces@lists.ae5k.us]
On Behalf Of KD5NWA
Sent: Tuesday, January 17, 2006 8:03 PM
To: Xylo-SDR Discussion
Subject: Re: [Xylo-SDR] Enclosure Drawing

I went ahead and put it in my web site, you need to register the copy 
but it's free, and registration is very simple.

< http://www.qrpradio.com/pub/Ham/SDR/Cad%20Viewer/eDrawing/ >

At 06:57 PM 1/17/2006, you wrote:
>I would like a copy of the drawings.
>
>If someone needs software to display DWG or DWF drawings let me know,
>I have a excellent free AutoCAD display program.
>
>At 06:48 PM 1/17/2006, you wrote:
> >Phil
> >
> >I have the DWG files for this at work from RoseBopla. If you have Autocad
or
> >AutocadLT or or anything which reads DWG files I'll send them to you.
They
> >are more detailed and also give variances in the extrusion max and
typical.
> >I'll send them from work.
> >
> >Yes, I was thinking that the dimension of the MB should be the dimension
of
> >the connector IF we use standoffs, however what about making the buss the
> >backpanel and coming up with a cover for that? (in message which passed
in
> >flight)
> >
> >Eric
> >
> >
> >-----Original Message-----
> >From: xylo-sdr-bounces@lists.ae5k.us
[mailto:xylo-sdr-bounces@lists.ae5k.us]
> >On Behalf Of Philip Covington
> >Sent: Tuesday, January 17, 2006 7:22 PM
> >To: Xylo-SDR Discussion
> >Subject: Re: [Xylo-SDR] Enclosure Drawing
> >
> >On 1/17/06, Eric Ellison <ecellison@comcast.net> wrote:
> > > Phil
> > >
> > > Thank you very much. Yes, this is exactly how I envisioned it should
be.
> >We
> > > also have space to the left for non bus connected 4x4 boards. Power
> >Supply?
> >
> >Eric,
> >
> >I think I have the dimensions of the box and slots correct so I should
> >be able to come up with an exact dimension that we would have to make
> >the motherboard.  Since it has to fit inside the  enclosure it
> >obviously cannot be 100x100mm.  The width is ok, but the height will
> >be 97.4mm minus some clearance for adjustment.
> >
> >If you look at the drawing you will see that there is space (a notch
> >or slot) for intermediate 100x100mm double sided PCB board material
> >for shielding between the boards spaced at 0.800".
> >
> >I will add the motherboard to the drawing tomorrow and maybe some end
> >plate info.
> >
> >73 de Phil N8VB
> >_______________________________________________
> >Xylo-SDR mailing list
> >To post msg: Xylo-SDR@ae5k.us
> >Subscription help: http://lists.ae5k.us/listinfo.cgi/xylo-sdr-ae5k.us
> >Xylo-SDR web page: http://xylo-sdr.ae5k.us
> >Forum pages: http://www.hamsdr.com/hamsdrforum/
> >
> >_______________________________________________
> >Xylo-SDR mailing list
> >To post msg: Xylo-SDR@ae5k.us
> >Subscription help: http://lists.ae5k.us/listinfo.cgi/xylo-sdr-ae5k.us
> >Xylo-SDR web page: http://xylo-sdr.ae5k.us
> >Forum pages: http://www.hamsdr.com/hamsdrforum/
>
>
>Cecil Bayona
>KD5NWA
>www.qrpradio.com
>
>"I fail to see why doing the same thing over and over and getting the
>same results every time is insanity: I've almost proved it isn't;
>only a few more tests now and I'm sure results will differ this time ... "
>
>_______________________________________________
>Xylo-SDR mailing list
>To post msg: Xylo-SDR@ae5k.us
>Subscription help: http://lists.ae5k.us/listinfo.cgi/xylo-sdr-ae5k.us
>Xylo-SDR web page: http://xylo-sdr.ae5k.us
>Forum pages: http://www.hamsdr.com/hamsdrforum/


Cecil Bayona
KD5NWA
www.qrpradio.com

"I fail to see why doing the same thing over and over and getting the 
same results every time is insanity: I've almost proved it isn't; 
only a few more tests now and I'm sure results will differ this time ... " 

_______________________________________________
Xylo-SDR mailing list
To post msg: Xylo-SDR@ae5k.us
Subscription help: http://lists.ae5k.us/listinfo.cgi/xylo-sdr-ae5k.us
Xylo-SDR web page: http://xylo-sdr.ae5k.us
Forum pages: http://www.hamsdr.com/hamsdrforum/