[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xylo-SDR] RFC - Motherboard



Phil

Really slick! Was just wonderin' out loud. Makes sense. You're going to end
up owning all four slots anyway!

Eric


-----Original Message-----
From: xylo-sdr-bounces@lists.ae5k.us [mailto:xylo-sdr-bounces@lists.ae5k.us]
On Behalf Of Philip Covington
Sent: Tuesday, January 24, 2006 11:27 PM
To: Xylo-SDR Discussion
Subject: Re: [Xylo-SDR] RFC - Motherboard

On 1/24/06, Eric Ellison <ecellison@comcast.net> wrote:
> Phil
>
> You are right. I ceased to panic after the first flurry on that matter.
> FPGA's in the capability range we are talking about are not that
expensive.
>
> However, in this exchange which you have explained well right here:
>
> If you used ALL the resources on the Lions 'heart' can you do what you are
> planning below? Your project does NOT have to co-exist with any others,
just
> a different FPGA program and leverage of programs in common with other
> projects like FX2. Other slots used for the BPF board etc. If so, that
WOULD
> make the daughter card + Buss concept viable. After all the Janus is a
> totally different project, and will never need to co-exist with your
radio!
> It would also make the Lionheart a little more flexible in that it would
> allow for a 'squatter'. I realize it depends on physical space, but
> 'squatting' on cleverly spaced pins could do it. Nothing has all that much
> height, in any of these projects except front panel stuff.
>
> Just wondering.
>
> Eric

Eric,

Actually the Janus will probably be a part of my project.  I will need
a way to get audio out for RX and audio in for TX - I'll need at least
the TI CODEC part of it.  Also, I can envision having both a LTC2208
board and a QSD based board in one radio.  The LTC2208 could be used
to scan big chunks of spectrum and direct the QSD based board to tune
to a signal of interest while the LTC2208 continues the scan.  I also
need to be able to decode command signals via USB to an IO controller
board - that function will be handled by the Lionheart board.

Phil C
_______________________________________________
Xylo-SDR mailing list
To post msg: Xylo-SDR@ae5k.us
Subscription help: http://lists.ae5k.us/listinfo.cgi/xylo-sdr-ae5k.us
Xylo-SDR web page: http://xylo-sdr.ae5k.us
Forum pages: http://www.hamsdr.com/hamsdrforum/
Archives: http://lists.ae5k.us/pipermail/xylo-sdr-ae5k.us/