Ghpsdr dspserver

From HPSDRwiki
Jump to: navigation, search

The dspserver program is used to separate the DSP components from the GUI components.


dspserver accepts the following command on the command line.

--receiver 0|1|2|3 (default 0)

receiver that this client is attached to (Please note singular). Also please not that receivers are 0 based.

--server 0.0.0.0 (default 127.0.0.1)

ip address of the server machine. Default is the localhost (127.0.0.1).

--soundcard name (depends on your machine)

--offset 0